IS 6603 X02Cr25Ni7Mo4CuWN vs IS 6603 X02Cr25Ni7Mo4N
Strong Match — 88.5% match
based on chemical composition and mechanical property overlap.
IS 6603 X02Cr25Ni7Mo4CuWN (IS 6603:2024) and IS 6603 X02Cr25Ni7Mo4N (IS 6603:2024) are both steel grades.
Both fall under the Stainless Steel category.
IS 6603 X02Cr25Ni7Mo4CuWN is typically used for general purposes, semi-finished products, bars, wire rods and bright bars, while IS 6603 X02Cr25Ni7Mo4N is commonly used for general purposes, semi-finished products, bars, wire rods and bright bars.
IS 6603 X02Cr25Ni7Mo4CuWN is defined under Bureau of Indian Standards (IS), originating from India, while IS 6603 X02Cr25Ni7Mo4N is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, IS 6603 X02Cr25Ni7Mo4CuWN vs IS 6603 X02Cr25Ni7Mo4N is a 82.8% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 88.5%.
Frequently Compared With IS 6603 X02Cr25Ni7Mo4CuWN:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
IS 6603 X02Cr25Ni7Mo4CuWN
IS 6603 X02Cr25Ni7Mo4N
Tensile Strength
>=730 MPa
>=730 MPa
Yield Strength
>=530 MPa
>=530 MPa
Elongation
>=25%
>=25%
Hardness
<=290 HB
<=290 HB
Condition
Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Tensile Strength is a minimum as printed, hardness for guidance only
Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Tensile Strength is a minimum as printed, hardness for guidance only
Typical Applications
IS 6603 X02Cr25Ni7Mo4CuWN
General purposes, semi-finished products, bars, wire rods and bright bars
IS 6603 X02Cr25Ni7Mo4N
General purposes, semi-finished products, bars, wire rods and bright bars
Key Differences
IS 6603 X02Cr25Ni7Mo4CuWN specifies Cu, W which are not specified for IS 6603 X02Cr25Ni7Mo4N.
Can IS 6603 X02Cr25Ni7Mo4CuWN Be Substituted With IS 6603 X02Cr25Ni7Mo4N?
IS 6603 X02Cr25Ni7Mo4CuWN and IS 6603 X02Cr25Ni7Mo4N overlap closely enough on chemistry and mechanical properties that IS 6603 X02Cr25Ni7Mo4N is often considered as a substitute for IS 6603 X02Cr25Ni7Mo4CuWN in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between IS 6603 X02Cr25Ni7Mo4CuWN and IS 6603 X02Cr25Ni7Mo4N?
IS 6603 X02Cr25Ni7Mo4CuWN specifies Cu, W which are not specified for IS 6603 X02Cr25Ni7Mo4N.
Can IS 6603 X02Cr25Ni7Mo4CuWN be substituted with IS 6603 X02Cr25Ni7Mo4N?
IS 6603 X02Cr25Ni7Mo4CuWN and IS 6603 X02Cr25Ni7Mo4N overlap closely enough on chemistry and mechanical properties that IS 6603 X02Cr25Ni7Mo4N is often considered as a substitute for IS 6603 X02Cr25Ni7Mo4CuWN in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.