Post Stock Login Register

IS 6603 X110Cr17 vs GOST 5632 08X18H10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 6603 X110Cr17 (IS 6603:2024) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. IS 6603 X110Cr17 is typically used for general purposes, semi-finished products, bars, wire rods and bright bars, while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. IS 6603 X110Cr17 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, IS 6603 X110Cr17 vs GOST 5632 08X18H10 is a 57.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 6603 X110Cr17:
EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
57.8%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property IS 6603 X110Cr17 GOST 5632 08X18H10
Standard IS 6603:2024 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) 0.95-1.20 ≤0.08
Si (%) <=1.00 ≤0.80
Mn (%) <=1.00 ≤2.00
P (%) <=0.040 ≤0.035
S (%) <=0.030 ≤0.020
Cr (%) 16.0-18.0 17.0–19.0
Mo (%) <=0.75 Not specified
Ni (%) <=0.60 9.0–11.0
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6603 X110Cr17 GOST 5632 08X18H10
Hardness <=285 HB Not specified
Condition Soft annealed (+A), conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 100 mm; hardness as printed Not specified
Tensile Strength Not specified ≥520 MPa
Yield Strength Not specified ≥205 MPa
Elongation Not specified ≥40%
Typical Applications
IS 6603 X110Cr17
General purposes, semi-finished products, bars, wire rods and bright bars
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
Can IS 6603 X110Cr17 Be Substituted With GOST 5632 08X18H10?
IS 6603 X110Cr17 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 6603 X110Cr17
No active listings currently.
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
IS 6603 X110Cr17
0 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6603 X110Cr17 and GOST 5632 08X18H10?
IS 6603 X110Cr17 specifies Mo which is not specified for GOST 5632 08X18H10.
Can IS 6603 X110Cr17 be substituted with GOST 5632 08X18H10?
IS 6603 X110Cr17 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.