Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
IS 6911 X04Cr19Ni9 (IS 6911:1992) and EN 10088-1 1.4845 (EN 10088-1:2014) are both steel grades.
Both fall under the Stainless Steel category.
IS 6911 X04Cr19Ni9 is typically used for used in food equipment, chemical processing units, kitchenware, tanks, piping, and architectural applications., while EN 10088-1 1.4845 is commonly used for furnace parts, heat exchangers, kiln components.
IS 6911 X04Cr19Ni9 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 1.4845 is defined under European Standard (EN), originating from Europe.
As per chemical composition, IS 6911 X04Cr19Ni9 vs EN 10088-1 1.4845 is a 68.1% match.
As per mechanical properties, the match is 33.3%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
IS 6911 X04Cr19Ni9
EN 10088-1 1.4845
Bend Test (180 deg)
Not required
Not specified
Elongation (50 mm, annealed)
>=40%
Not specified
Hardness (annealed, max)
192 HBS, 92 HRB
Not specified
Tensile Strength (annealed)
>=400 MPa
Not specified
Yield Strength (0.2% proof, annealed)
>=200 MPa
Not specified
Tensile Strength
Not specified
≥515 MPa
Yield Strength
Not specified
≥205 MPa
Elongation
Not specified
≥40%
Max Service Temp
Not specified
1100°C continuous
Typical Applications
IS 6911 X04Cr19Ni9
Used in food equipment, chemical processing units, kitchenware, tanks, piping, and architectural applications.
EN 10088-1 1.4845
Furnace parts, heat exchangers, kiln components
Key Differences
IS 6911 X04Cr19Ni9 specifies P, S which are not specified for EN 10088-1 1.4845.
Can IS 6911 X04Cr19Ni9 Be Substituted With EN 10088-1 1.4845?
IS 6911 X04Cr19Ni9 and EN 10088-1 1.4845 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between IS 6911 X04Cr19Ni9 and EN 10088-1 1.4845?
IS 6911 X04Cr19Ni9 specifies P, S which are not specified for EN 10088-1 1.4845.
Can IS 6911 X04Cr19Ni9 be substituted with EN 10088-1 1.4845?
IS 6911 X04Cr19Ni9 and EN 10088-1 1.4845 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.