Strong Match — 100% match
based on chemical composition and mechanical property overlap.
IS 6911 X04Cr17Ni12Mo2Ti (IS 6911:1992) and ASTM A959 SS316 (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
IS 6911 X04Cr17Ni12Mo2Ti is typically used for stainless and heat-resisting steel plate, sheet and strip (clause 1.1), while ASTM A959 SS316 is commonly used for marine, chemical, pharmaceutical, food processing equipment.
IS 6911 X04Cr17Ni12Mo2Ti is defined under Bureau of Indian Standards (IS), originating from India, while ASTM A959 SS316 is defined under ASTM International, originating from United States.
As per chemical composition, IS 6911 X04Cr17Ni12Mo2Ti vs ASTM A959 SS316 is a 100% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 100%.
Frequently Compared With IS 6911 X04Cr17Ni12Mo2Ti:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
IS 6911 X04Cr17Ni12Mo2Ti
ASTM A959 SS316
Bend Test (180 deg)
Not required
Not specified
Elongation (50 mm, annealed)
>=35%
Not specified
Hardness (annealed, max)
192 HBS, 95 HRB
Not specified
Tensile Strength (annealed)
>=490 MPa
Not specified
Yield Strength (0.2% proof, annealed)
>=220 MPa
Not specified
Typical Applications
IS 6911 X04Cr17Ni12Mo2Ti
Stainless and heat-resisting steel plate, sheet and strip (clause 1.1)
IS 6911 X04Cr17Ni12Mo2Ti specifies Ti which is not specified for ASTM A959 SS316.
Can IS 6911 X04Cr17Ni12Mo2Ti Be Substituted With ASTM A959 SS316?
IS 6911 X04Cr17Ni12Mo2Ti and ASTM A959 SS316 overlap closely enough on chemistry and mechanical properties that ASTM A959 SS316 is often considered as a substitute for IS 6911 X04Cr17Ni12Mo2Ti in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between IS 6911 X04Cr17Ni12Mo2Ti and ASTM A959 SS316?
IS 6911 X04Cr17Ni12Mo2Ti specifies Ti which is not specified for ASTM A959 SS316.
Can IS 6911 X04Cr17Ni12Mo2Ti be substituted with ASTM A959 SS316?
IS 6911 X04Cr17Ni12Mo2Ti and ASTM A959 SS316 overlap closely enough on chemistry and mechanical properties that ASTM A959 SS316 is often considered as a substitute for IS 6911 X04Cr17Ni12Mo2Ti in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.