Post Stock Login Register

IS 6911:1992 X07Cr17Mn12Ni4 Steel: Specifications & Listings

IS 6911:1992 X07Cr17Mn12Ni4: Austenitic stainless steel X07Cr17Mn12Ni4 (numerical symbol 201 A) to IS 6911:1992 (reaffirmed 1998), made as plate, sheet and strip and normally supplied solution annealed and descaled. Minimum tensile strength annealed is 540 MPa with 0.2% proof stress of 260 MPa.

Category: Stainless Steel
Grade Details
GradeIS 6911:1992 X07Cr17Mn12Ni4
Standard IS 6911:1992
ApplicationsStainless and heat-resisting steel plate, sheet and strip (clause 1.1)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
IS 1570 (Part 5) X07Cr17Mn12Ni4 IS 1570 (Part 5):1985 India No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A959 XM-28 ASTM A959:2011 Close Alternative
EN 10088-1 X13CrMnNiN18-13-2 EN 10088-1:2014 Close Alternative
EN 10088-1 X13CrMnNiN18-13-2 EN 10088-1:2023 Close Alternative
ASTM A959 202 ASTM A959:2011 Close Alternative
EN 10088-1 X12CrMnNiN18-9-5 EN 10088-1:2014 Close Alternative
EN 10088-1 X12CrMnNiN18-9-5 EN 10088-1:2023 Close Alternative
EN 10088-1 X9CrMnNiCu17-8-5-2 EN 10088-1:2014 Close Alternative
EN 10088-1 X9CrMnNiCu17-8-5-2 EN 10088-1:2023 Close Alternative
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Cr Mn Ni P S Si
<=0.12 16.0-18.0 10.0-14.0 3.5-5.5 <=0.045 <=0.030 <=1.0
Mechanical Properties
Bend Test (180 deg) Not required
Elongation (50 mm, annealed) >=40%
Hardness (annealed, max) 217 HBS, 95 HRB
Tensile Strength (annealed) >=540 MPa
Yield Strength (0.2% proof, annealed) >=260 MPa

More data from IS 6911:1992

From the standard
Other composition limits from Table 1 and its note
Steel type
Austenitic
Numerical symbol (ISS)
201 A
Values
Maximum unless a range is given (ladle analysis)
Element not specified, Titanium, max
0.10
Element not specified, Niobium, max
0.20
Element not specified, Molybdenum, max
0.70
Element not specified, Copper, max
0.50
Elements not listed in Table 1 are not added to the steel except to finish the heat, and then only within the limits shown.
Source: IS 6911:1992, Table 1 and its note

Active IS 6911:1992 X07Cr17Mn12Ni4 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active IS 6911:1992 X07Cr17Mn12Ni4 listings at this time.

Register for Alerts

Buyer RFQs for IS 6911:1992 X07Cr17Mn12Ni4

+ Post an RFQ for this grade

No open buyer requirements for IS 6911:1992 X07Cr17Mn12Ni4 at this time.

Register for Alerts