Post Stock Login Register

JIS G4105 SCM435 vs IS 1570 (Part 4) 42Cr4Mo2

Strong Match — 90.3% match based on chemical composition and mechanical property overlap.

JIS G4105 SCM435 (JIS G4105:1979) and IS 1570 (Part 4) 42Cr4Mo2 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. JIS G4105 SCM435 is defined under Japanese Industrial Standards (JIS), originating from Japan, while IS 1570 (Part 4) 42Cr4Mo2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, JIS G4105 SCM435 vs IS 1570 (Part 4) 42Cr4Mo2 is a 90.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 90.3%.

Frequently Compared With JIS G4105 SCM435:
NF A35-565 100C6 UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A GOST 4543 12HN3A IS 4367 07Cr4Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 07Cr4Mo6
Match Breakdown
CHEMISTRY MATCH
90.3%
MECHANICAL MATCH
No shared data
OVERALL
90.3%
Specifications
Property JIS G4105 SCM435 IS 1570 (Part 4) 42Cr4Mo2
Standard JIS G4105:1979 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.33–0.38 0.38-0.45
Si (%) 0.15–0.35 0.10-0.35
Mn (%) 0.60–0.90 0.60-0.90
Cr (%) 0.90–1.20 0.90-1.20
Mo (%) 0.15–0.30 0.15-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4105 SCM435 IS 1570 (Part 4) 42Cr4Mo2
Tensile Strength ≥830 MPa Not specified
Yield Strength ≥685 MPa Not specified
Elongation ≥15% Not specified
Hardness 248–302 HB Not specified
Typical Applications
JIS G4105 SCM435
Gears, shafts, high tensile bolts
IS 1570 (Part 4) 42Cr4Mo2
Not documented
Can JIS G4105 SCM435 Be Substituted With IS 1570 (Part 4) 42Cr4Mo2?
JIS G4105 SCM435 and IS 1570 (Part 4) 42Cr4Mo2 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 4) 42Cr4Mo2 is often considered as a substitute for JIS G4105 SCM435 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
JIS G4105 SCM435
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4600–5300 mm (181.1–208.66 in)
IS 1570 (Part 4) 42Cr4Mo2
No active listings currently.
On M-EX Right Now
JIS G4105 SCM435
2 active listings and RFQs →
IS 1570 (Part 4) 42Cr4Mo2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4105 SCM435 and IS 1570 (Part 4) 42Cr4Mo2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4105 SCM435 be substituted with IS 1570 (Part 4) 42Cr4Mo2?
JIS G4105 SCM435 and IS 1570 (Part 4) 42Cr4Mo2 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 4) 42Cr4Mo2 is often considered as a substitute for JIS G4105 SCM435 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.