Post Stock Login Register

JIS G4303 SUS304 vs GOST 5632 06Kh23N28

Related Material — 55.6% match based on chemical composition and mechanical property overlap.

JIS G4303 SUS304 (JIS G4303:2021) and GOST 5632 06Kh23N28 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4303 SUS304 is typically used for food equipment, chemical vessels, architectural applications, while GOST 5632 06Kh23N28 is commonly used for furnace components, heat exchangers, high temperature applications. JIS G4303 SUS304 is defined under Japanese Industrial Standards (JIS) (Japan).

As per chemical composition, JIS G4303 SUS304 vs GOST 5632 06Kh23N28 is a 83.3% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 55.6%.

Frequently Compared With JIS G4303 SUS304:
EN 10088-1 1.4845 EN 10088-1 1.4301 GOST 5632 08X18H10 EN 10088-1 1.4006 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 GOST 5632 12Kh13 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
83.3%
MECHANICAL MATCH
0%
OVERALL
55.6%
Specifications
Property JIS G4303 SUS304 GOST 5632 06Kh23N28
Standard JIS G4303:2021 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) ≤0.08 ≤0.06
Si (%) ≤1.00 ≤0.80
Mn (%) ≤2.00 ≤2.00
Cr (%) 18.0–20.0 22.0–25.0
Ni (%) 8.0–10.5 26.0–29.0
P (%) ≤0.045 Not specified
S (%) ≤0.030 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4303 SUS304 GOST 5632 06Kh23N28
Tensile Strength ≥520 MPa ≥510 MPa
Yield Strength ≥205 MPa ≥196 MPa
Elongation ≥40% ≥35%
Hardness ≤187 HB Not specified
Max Service Temp Not specified 1050°C
Typical Applications
JIS G4303 SUS304
Food equipment, chemical vessels, architectural applications
GOST 5632 06Kh23N28
Furnace components, heat exchangers, high temperature applications
Key Differences
Can JIS G4303 SUS304 Be Substituted With GOST 5632 06Kh23N28?
JIS G4303 SUS304 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4303 SUS304
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–4000 mm (98.43–157.48 in)
GOST 5632 06Kh23N28
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3100–3400 mm (122.05–133.86 in)
On M-EX Right Now
JIS G4303 SUS304
3 active listings and RFQs →
GOST 5632 06Kh23N28
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4303 SUS304 and GOST 5632 06Kh23N28?
JIS G4303 SUS304 specifies P, S which are not specified for GOST 5632 06Kh23N28.
Can JIS G4303 SUS304 be substituted with GOST 5632 06Kh23N28?
JIS G4303 SUS304 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.