Post Stock Login Register

JIS G4303 SUS304 vs GOST 5632 08X18H10

Strong Match — 93.5% match based on chemical composition and mechanical property overlap.

JIS G4303 SUS304 (JIS G4303:2021) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4303 SUS304 is typically used for food equipment, chemical vessels, architectural applications, while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. JIS G4303 SUS304 is defined under Japanese Industrial Standards (JIS) (Japan).

As per chemical composition, JIS G4303 SUS304 vs GOST 5632 08X18H10 is a 90.3% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 93.5%.

Frequently Compared With JIS G4303 SUS304:
EN 10088-1 1.4845 EN 10088-1 1.4301 GOST 5632 06Kh23N28 EN 10088-1 1.4006 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 GOST 5632 12Kh13 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
90.3%
MECHANICAL MATCH
100%
OVERALL
93.5%
Specifications
Property JIS G4303 SUS304 GOST 5632 08X18H10
Standard JIS G4303:2021 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) ≤0.08 ≤0.08
Si (%) ≤1.00 ≤0.80
Mn (%) ≤2.00 ≤2.00
Cr (%) 18.0–20.0 17.0–19.0
Ni (%) 8.0–10.5 9.0–11.0
P (%) ≤0.045 ≤0.035
S (%) ≤0.030 ≤0.020
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4303 SUS304 GOST 5632 08X18H10
Tensile Strength ≥520 MPa ≥520 MPa
Yield Strength ≥205 MPa ≥205 MPa
Elongation ≥40% ≥40%
Hardness ≤187 HB Not specified
Typical Applications
JIS G4303 SUS304
Food equipment, chemical vessels, architectural applications
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Can JIS G4303 SUS304 Be Substituted With GOST 5632 08X18H10?
JIS G4303 SUS304 and GOST 5632 08X18H10 overlap closely enough on chemistry and mechanical properties that GOST 5632 08X18H10 is often considered as a substitute for JIS G4303 SUS304 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
JIS G4303 SUS304
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–4000 mm (98.43–157.48 in)
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
JIS G4303 SUS304
3 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4303 SUS304 and GOST 5632 08X18H10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4303 SUS304 be substituted with GOST 5632 08X18H10?
JIS G4303 SUS304 and GOST 5632 08X18H10 overlap closely enough on chemistry and mechanical properties that GOST 5632 08X18H10 is often considered as a substitute for JIS G4303 SUS304 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.