Related Material — 67.9% match
based on chemical composition and mechanical property overlap.
JIS G4303 SUS310S (JIS G4303:2021) and ASTM A959 304L (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4303 SUS310S is typically used for furnace parts, heat treatment baskets, kiln components, while ASTM A959 304L is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1).
JIS G4303 SUS310S is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A959 304L is defined under ASTM International, originating from United States.
As per chemical composition, JIS G4303 SUS310S vs ASTM A959 304L is a 67.9% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a related material overall at 67.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can JIS G4303 SUS310S Be Substituted With ASTM A959 304L?
JIS G4303 SUS310S and ASTM A959 304L share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between JIS G4303 SUS310S and ASTM A959 304L?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4303 SUS310S be substituted with ASTM A959 304L?
JIS G4303 SUS310S and ASTM A959 304L share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.