Post Stock Login Register

JIS G4304 SUS329J3L vs GOST 5632 08X18H10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

JIS G4304 SUS329J3L (JIS G4304:2021) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4304 SUS329J3L is typically used for hot-rolled stainless steel plates and strips, while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. JIS G4304 SUS329J3L is defined under Japanese Industrial Standards (JIS) (Japan).

As per chemical composition, JIS G4304 SUS329J3L vs GOST 5632 08X18H10 is a 53.8% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With JIS G4304 SUS329J3L:
ASTM A959 255 ASTM A959 2205 ASTM A959 .- GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
53.8%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property JIS G4304 SUS329J3L GOST 5632 08X18H10
Standard JIS G4304:2021 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 ≤0.08
Si (%) <=1.00 ≤0.80
Mn (%) <=2.00 ≤2.00
P (%) <=0.040 ≤0.035
S (%) <=0.030 ≤0.020
Ni (%) 4.50-6.50 9.0–11.0
Cr (%) 21.00-24.00 17.0–19.0
Mo (%) 2.50-3.50 Not specified
N (%) 0.08-0.20 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4304 SUS329J3L GOST 5632 08X18H10
Tensile Strength >=620 MPa ≥520 MPa
Yield Strength >=450 MPa ≥205 MPa
Elongation >=18% ≥40%
Hardness <=302 HB Not specified
Condition Solution heat treated plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4304 SUS329J3L
Hot-rolled stainless steel plates and strips
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
Can JIS G4304 SUS329J3L Be Substituted With GOST 5632 08X18H10?
JIS G4304 SUS329J3L and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4304 SUS329J3L
No active listings currently.
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
JIS G4304 SUS329J3L
0 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4304 SUS329J3L and GOST 5632 08X18H10?
JIS G4304 SUS329J3L specifies Mo, N which are not specified for GOST 5632 08X18H10.
Can JIS G4304 SUS329J3L be substituted with GOST 5632 08X18H10?
JIS G4304 SUS329J3L and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.