Post Stock Login Register

JIS G4304 SUS630 vs ASTM A959 630

Strong Match — 92.8% match based on chemical composition and mechanical property overlap.

JIS G4304 SUS630 (JIS G4304:2021) and ASTM A959 630 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. JIS G4304 SUS630 is typically used for hot-rolled stainless steel plates and strips, while ASTM A959 630 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). JIS G4304 SUS630 is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A959 630 is defined under ASTM International, originating from United States.

As per chemical composition, JIS G4304 SUS630 vs ASTM A959 630 is a 92.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 92.8%.

Frequently Compared With JIS G4304 SUS630:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
92.8%
MECHANICAL MATCH
No shared data
OVERALL
92.8%
Specifications
Property JIS G4304 SUS630 ASTM A959 630
Standard JIS G4304:2021 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.07 <=0.07
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Ni (%) 3.00-5.00 3.0-5.0
Cr (%) 15.00-17.50 15.0-17.0
Cu (%) 3.00-5.00 3.0-5.0
Nb (%) 0.15-0.45 Not specified
Cb (%) Not specified 0.15-0.45
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4304 SUS630 ASTM A959 630
Hardness <=363 HB Not specified
Condition Solution heat treated plate and strip (no strength values specified; aged conditions are in the blocks) Not specified
Typical Applications
JIS G4304 SUS630
Hot-rolled stainless steel plates and strips
ASTM A959 630
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can JIS G4304 SUS630 Be Substituted With ASTM A959 630?
JIS G4304 SUS630 and ASTM A959 630 overlap closely enough on chemistry and mechanical properties that ASTM A959 630 is often considered as a substitute for JIS G4304 SUS630 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
JIS G4304 SUS630
0 active listings and RFQs →
ASTM A959 630
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4304 SUS630 and ASTM A959 630?
JIS G4304 SUS630 specifies Nb which is not specified for ASTM A959 630. ASTM A959 630 specifies Cb which is not specified for JIS G4304 SUS630.
Can JIS G4304 SUS630 be substituted with ASTM A959 630?
JIS G4304 SUS630 and ASTM A959 630 overlap closely enough on chemistry and mechanical properties that ASTM A959 630 is often considered as a substitute for JIS G4304 SUS630 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.