Close Alternative — 78.9% match
based on chemical composition and mechanical property overlap.
JIS G4304 SUS836L (JIS G4304:2021) and ASTM A240/A240M S32053 (ASTM A240/A240M:2025) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4304 SUS836L is typically used for hot-rolled stainless steel plates and strips, while ASTM A240/A240M S32053 is commonly used for pressure vessels and general applications (plate, sheet and strip).
JIS G4304 SUS836L is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A240/A240M S32053 is defined under ASTM International, originating from United States.
As per chemical composition, JIS G4304 SUS836L vs ASTM A240/A240M S32053 is a 80.8% match.
As per mechanical properties, the match is 75%.
Combined, this makes them a close alternative overall at 78.9%.
Other Stainless Steel Grades to Compare With JIS G4304 SUS836L:
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4304 SUS836L
ASTM A240/A240M S32053
Tensile Strength
>=640 MPa
>=640 MPa
Yield Strength
>=275 MPa
>=295 MPa
Elongation
>=40%
>=40%
Hardness
<=217 HB
<=217 HB
Condition
Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser
Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
JIS G4304 SUS836L
Hot-rolled stainless steel plates and strips
ASTM A240/A240M S32053
Pressure vessels and general applications (plate, sheet and strip)
Can JIS G4304 SUS836L Be Substituted With ASTM A240/A240M S32053?
JIS G4304 SUS836L and ASTM A240/A240M S32053 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between JIS G4304 SUS836L and ASTM A240/A240M S32053?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4304 SUS836L be substituted with ASTM A240/A240M S32053?
JIS G4304 SUS836L and ASTM A240/A240M S32053 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.