JIS G4305 SUS304N2 vs GOST 5632 06Kh23N28

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS304N2 (JIS G4305:2012) and GOST 5632 06Kh23N28 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS304N2 is typically used for cold-rolled stainless steel plates, sheet and strip, while GOST 5632 06Kh23N28 is commonly used for furnace components, heat exchangers, high temperature applications. JIS G4305 SUS304N2 is defined under Japanese Industrial Standards (JIS) (Japan).

As per chemical composition, JIS G4305 SUS304N2 vs GOST 5632 06Kh23N28 is a 58.8% match. As per mechanical properties, the match is 33.3%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With JIS G4305 SUS304N2:
ASTM A959 .- EN 10088-1 1.4845 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr13H GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
58.8%
MECHANICAL MATCH
33.3%
OVERALL
35%
Specifications
Property JIS G4305 SUS304N2 GOST 5632 06Kh23N28
Standard JIS G4305:2012 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) <=0.08 ≤0.06
Si (%) <=1.00 ≤0.80
Mn (%) <=2.50 ≤2.00
P (%) <=0.045 Not specified
S (%) <=0.030 Not specified
Ni (%) 7.50-10.50 26.0–29.0
Cr (%) 18.00-20.00 22.0–25.0
N (%) 0.15-0.30 Not specified
Nb (%) <=0.15 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS304N2 GOST 5632 06Kh23N28
Tensile Strength >=690 MPa ≥510 MPa
Yield Strength >=345 MPa ≥196 MPa
Elongation >=35% ≥35%
Hardness <=248 HB Not specified
Condition Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser Not specified
Max Service Temp Not specified 1050°C
Typical Applications
JIS G4305 SUS304N2
Cold-rolled stainless steel plates, sheet and strip
GOST 5632 06Kh23N28
Furnace components, heat exchangers, high temperature applications
Key Differences
Can JIS G4305 SUS304N2 Be Substituted With GOST 5632 06Kh23N28?
JIS G4305 SUS304N2 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4305 SUS304N2
No active listings currently.
GOST 5632 06Kh23N28
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 3100–3400 mm (122.05–133.86 in)
On M-EX Right Now
JIS G4305 SUS304N2
0 active listings and RFQs →
GOST 5632 06Kh23N28
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS304N2 and GOST 5632 06Kh23N28?
JIS G4305 SUS304N2 specifies P, S, N, Nb which are not specified for GOST 5632 06Kh23N28.
Can JIS G4305 SUS304N2 be substituted with GOST 5632 06Kh23N28?
JIS G4305 SUS304N2 and GOST 5632 06Kh23N28 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.