Related Material — 64.4% match
based on chemical composition and mechanical property overlap.
JIS G4305 SUS305 (JIS G4305:2012) and GB/T 3280 06Cr19Ni10 (GB/T 3280-2015) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4305 SUS305 is typically used for cold-rolled stainless steel plates, sheet and strip, while GB/T 3280 06Cr19Ni10 is commonly used for used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners..
JIS G4305 SUS305 is defined under Japanese Industrial Standards (JIS), originating from Japan, while GB/T 3280 06Cr19Ni10 is defined under Guobiao Standards (GB/T), originating from China.
As per chemical composition, JIS G4305 SUS305 vs GB/T 3280 06Cr19Ni10 is a 84.2% match.
As per mechanical properties, the match is 25%.
Combined, this makes them a related material overall at 64.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4305 SUS305
GB/T 3280 06Cr19Ni10
Tensile Strength
>=480 MPa
520-720 MPa
Yield Strength
>=175 MPa
205-310 MPa
Elongation
>=40%
40-60%
Hardness
<=187 HB
187 HB max
Condition
Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser
Not specified
Typical Applications
JIS G4305 SUS305
Cold-rolled stainless steel plates, sheet and strip
GB/T 3280 06Cr19Ni10
Used for kitchen equipment, food processing machinery, chemical tanks, piping, architectural panels, and fasteners.
Can JIS G4305 SUS305 Be Substituted With GB/T 3280 06Cr19Ni10?
JIS G4305 SUS305 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between JIS G4305 SUS305 and GB/T 3280 06Cr19Ni10?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4305 SUS305 be substituted with GB/T 3280 06Cr19Ni10?
JIS G4305 SUS305 and GB/T 3280 06Cr19Ni10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.