Post Stock Login Register

JIS G4305 SUS316N vs ASTM A959 SS316

Strong Match — 94.4% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS316N (JIS G4305:2012) and ASTM A959 SS316 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS316N is typically used for cold-rolled stainless steel plates, sheet and strip, while ASTM A959 SS316 is commonly used for marine, chemical, pharmaceutical, food processing equipment. JIS G4305 SUS316N is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A959 SS316 is defined under ASTM International, originating from United States.

As per chemical composition, JIS G4305 SUS316N vs ASTM A959 SS316 is a 94.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 94.4%.

Frequently Compared With JIS G4305 SUS316N:
IS 1570 (Part 7) 12Cr13H GOST 5632 06Kh23N28 IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
94.4%
MECHANICAL MATCH
No shared data
OVERALL
94.4%
Specifications
Property JIS G4305 SUS316N ASTM A959 SS316
Standard JIS G4305:2012 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.08
Si (%) <=1.00 <=1.00
Mn (%) <=2.00 <=2.00
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Ni (%) 10.00-14.00 10.0-14.0
Cr (%) 16.00-18.00 16.0-18.0
Mo (%) 2.00-3.00 2.00-3.00
N (%) 0.10-0.22 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS316N ASTM A959 SS316
Tensile Strength >=550 MPa Not specified
Yield Strength >=275 MPa Not specified
Elongation >=35% Not specified
Hardness <=217 HB Not specified
Condition Solution heat treated plate and strip; 0.2 percent proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS316N
Cold-rolled stainless steel plates, sheet and strip
ASTM A959 SS316
Marine, chemical, pharmaceutical, food processing equipment
Key Differences
Can JIS G4305 SUS316N Be Substituted With ASTM A959 SS316?
JIS G4305 SUS316N and ASTM A959 SS316 overlap closely enough on chemistry and mechanical properties that ASTM A959 SS316 is often considered as a substitute for JIS G4305 SUS316N in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
JIS G4305 SUS316N
No active listings currently.
ASTM A959 SS316
Sheet → (24 listings)
Thickness: 2–6 mm (0.08–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–4000 mm (98.43–157.48 in)
Plate → (6 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2600–4200 mm (102.36–165.35 in)
Round Bar → (3 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 2500–4200 mm (98.43–165.35 in)
On M-EX Right Now
JIS G4305 SUS316N
0 active listings and RFQs →
ASTM A959 SS316
33 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS316N and ASTM A959 SS316?
JIS G4305 SUS316N specifies N which is not specified for ASTM A959 SS316.
Can JIS G4305 SUS316N be substituted with ASTM A959 SS316?
JIS G4305 SUS316N and ASTM A959 SS316 overlap closely enough on chemistry and mechanical properties that ASTM A959 SS316 is often considered as a substitute for JIS G4305 SUS316N in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.