Post Stock Login Register

JIS G4305 SUS405 vs EN 10088-1 1.4401

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS405 (JIS G4305:2012) and EN 10088-1 1.4401 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS405 is typically used for cold-rolled stainless steel plates, sheet and strip, while EN 10088-1 1.4401 is commonly used for marine, chemical processing, pharmaceutical equipment. JIS G4305 SUS405 is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 1.4401 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4305 SUS405 vs EN 10088-1 1.4401 is a 56.9% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With JIS G4305 SUS405:
GOST 5632 08X18H10 EN 10088-1 1.4301 GOST 5632 06Kh23N28 ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
56.9%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property JIS G4305 SUS405 EN 10088-1 1.4401
Standard JIS G4305:2012 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.08 ≤0.07
Si (%) <=1.00 ≤1.00
Mn (%) <=1.00 ≤2.00
P (%) <=0.040 Not specified
S (%) <=0.030 Not specified
Cr (%) 11.50-14.50 16.5–18.5
Ni (%) <=0.60 10.5–13.5
Al (%) 0.10-0.30 Not specified
Mo (%) Not specified 2.0–2.5
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS405 EN 10088-1 1.4401
Tensile Strength >=410 MPa ≥520 MPa
Yield Strength >=175 MPa ≥210 MPa
Elongation >=20% ≥40%
Hardness <=183 HB ≤215 HB
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS405
Cold-rolled stainless steel plates, sheet and strip
EN 10088-1 1.4401
Marine, chemical processing, pharmaceutical equipment
Key Differences
Can JIS G4305 SUS405 Be Substituted With EN 10088-1 1.4401?
JIS G4305 SUS405 and EN 10088-1 1.4401 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4305 SUS405
No active listings currently.
EN 10088-1 1.4401
Sheet → (4 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3400 mm (98.43–133.86 in)
On M-EX Right Now
JIS G4305 SUS405
0 active listings and RFQs →
EN 10088-1 1.4401
4 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS405 and EN 10088-1 1.4401?
JIS G4305 SUS405 specifies P, S, Al which are not specified for EN 10088-1 1.4401. EN 10088-1 1.4401 specifies Mo which is not specified for JIS G4305 SUS405.
Can JIS G4305 SUS405 be substituted with EN 10088-1 1.4401?
JIS G4305 SUS405 and EN 10088-1 1.4401 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.