Close Alternative — 84.9% match
based on chemical composition and mechanical property overlap.
JIS G4305 SUS444 (JIS G4305:2012) and JIS G4305 SUS436L (JIS G4305:2012) are both steel grades.
Both fall under the Stainless Steel category.
JIS G4305 SUS444 is typically used for cold-rolled stainless steel plates, sheet and strip, while JIS G4305 SUS436L is commonly used for cold-rolled stainless steel plates, sheet and strip.
JIS G4305 SUS444 is defined under Japanese Industrial Standards (JIS), originating from Japan, while JIS G4305 SUS436L is defined under Japanese Industrial Standards (JIS), originating from Japan.
As per chemical composition, JIS G4305 SUS444 vs JIS G4305 SUS436L is a 87.5% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a close alternative overall at 84.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4305 SUS444
JIS G4305 SUS436L
Tensile Strength
>=410 MPa
>=410 MPa
Yield Strength
>=245 MPa
>=245 MPa
Elongation
>=20%
>=20%
Hardness
<=217 HB
<=217 HB
Condition
Annealed plate and strip; proof strength applies only when specified by the purchaser
Annealed plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
JIS G4305 SUS444
Cold-rolled stainless steel plates, sheet and strip
JIS G4305 SUS436L
Cold-rolled stainless steel plates, sheet and strip
Can JIS G4305 SUS444 Be Substituted With JIS G4305 SUS436L?
JIS G4305 SUS444 and JIS G4305 SUS436L are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between JIS G4305 SUS444 and JIS G4305 SUS436L?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4305 SUS444 be substituted with JIS G4305 SUS436L?
JIS G4305 SUS444 and JIS G4305 SUS436L are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.