Post Stock Login Register

JIS G4305 SUS447J1 vs ASTM A959 444

Related Material — 66.9% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS447J1 (JIS G4305:2012) and ASTM A959 444 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS447J1 is typically used for cold-rolled stainless steel plates, sheet and strip, while ASTM A959 444 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). JIS G4305 SUS447J1 is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A959 444 is defined under ASTM International, originating from United States.

As per chemical composition, JIS G4305 SUS447J1 vs ASTM A959 444 is a 66.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 66.9%.

Frequently Compared With JIS G4305 SUS447J1:
ASTM A959 29-4-2 ASTM A959 29-4 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
66.9%
MECHANICAL MATCH
No shared data
OVERALL
66.9%
Specifications
Property JIS G4305 SUS447J1 ASTM A959 444
Standard JIS G4305:2012 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.010 <=0.025
Si (%) <=0.40 <=1.00
Mn (%) <=0.40 <=1.00
P (%) <=0.030 <=0.040
S (%) <=0.020 <=0.030
Cr (%) 28.50-32.00 17.5-19.5
Mo (%) 1.50-2.50 1.75-2.50
N (%) <=0.015 <=0.035
Ni (%) <=0.50 <=1.00
Cu (%) <=0.20 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS447J1 ASTM A959 444
Tensile Strength >=450 MPa Not specified
Yield Strength >=295 MPa Not specified
Elongation >=22% Not specified
Hardness <=207 HB Not specified
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS447J1
Cold-rolled stainless steel plates, sheet and strip
ASTM A959 444
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can JIS G4305 SUS447J1 Be Substituted With ASTM A959 444?
JIS G4305 SUS447J1 and ASTM A959 444 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
JIS G4305 SUS447J1
0 active listings and RFQs →
ASTM A959 444
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS447J1 and ASTM A959 444?
JIS G4305 SUS447J1 specifies Cu which is not specified for ASTM A959 444.
Can JIS G4305 SUS447J1 be substituted with ASTM A959 444?
JIS G4305 SUS447J1 and ASTM A959 444 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.