Post Stock Login Register

JIS G4801 SUP6 vs EN 10089 55Si7

Related Material — 68.5% match based on chemical composition and mechanical property overlap.

JIS G4801 SUP6 (JIS G 4801:2005) and EN 10089 55Si7 (EN 10089:2002) are both steel grades. Both fall under the Spring Steel category. JIS G4801 SUP6 is typically used for automotive suspension springs, leaf springs, while EN 10089 55Si7 is commonly used for leaf springs, coil springs, torsion bars. JIS G4801 SUP6 is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10089 55Si7 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4801 SUP6 vs EN 10089 55Si7 is a 90.3% match. As per mechanical properties, the match is 25%. Combined, this makes them a related material overall at 68.5%.

Frequently Compared With JIS G4801 SUP6:
EN 10089 55Cr3 EN 10089 50CrV4 EN 10083-3 51CrV4 GB/T 1222 55CrMnA IS 3431 60Si7 IS 1570 (Part 4) 55Si7 IS 1570 (Part 4) 60Si7 IS 1570 (Part 4) 65Si7 IS 3195 113C6 IS 3431 50Cr4V2 BS 970 EN42 BS 970 EN42C
Match Breakdown
CHEMISTRY MATCH
90.3%
MECHANICAL MATCH
25%
OVERALL
68.5%
Specifications
Property JIS G4801 SUP6 EN 10089 55Si7
Standard JIS G 4801:2005 EN 10089:2002
Category Spring Steel Spring Steel
C (%) 0.56–0.64 0.51–0.59
Si (%) 1.50–1.80 1.50–2.00
Mn (%) 0.70–1.00 0.70–1.00
S (%) ≤0.030 ≤0.040
P (%) ≤0.030 ≤0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4801 SUP6 EN 10089 55Si7
Tensile Strength ≥1130 MPa 1000–1200 MPa
Yield Strength ≥980 MPa ≥900 MPa
Elongation ≥7% ≥7%
Hardness 341–415 HB 285–363 HB
Typical Applications
JIS G4801 SUP6
Automotive suspension springs, leaf springs
EN 10089 55Si7
Leaf springs, coil springs, torsion bars
Can JIS G4801 SUP6 Be Substituted With EN 10089 55Si7?
JIS G4801 SUP6 and EN 10089 55Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4801 SUP6
Round Bar → (2 listings)
Diameter: 30–30 mm (1.18–1.18 in)
Length: 4500–5700 mm (177.17–224.41 in)
EN 10089 55Si7
Round Bar → (3 listings)
Diameter: 30–30 mm (1.18–1.18 in)
Length: 4200–7000 mm (165.35–275.59 in)
On M-EX Right Now
JIS G4801 SUP6
2 active listings and RFQs →
EN 10089 55Si7
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4801 SUP6 and EN 10089 55Si7?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4801 SUP6 be substituted with EN 10089 55Si7?
JIS G4801 SUP6 and EN 10089 55Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.