Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
JIS G4801 SUP9 (JIS G 4801:2005) and IS 3195 52Cr4Mo2V (IS 3195:1992) are both steel grades.
Both fall under the Spring Steel category.
JIS G4801 SUP9 is typically used for automotive leaf springs, suspension springs, while IS 3195 52Cr4Mo2V is commonly used for volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword).
JIS G4801 SUP9 is defined under Japanese Industrial Standards (JIS), originating from Japan, while IS 3195 52Cr4Mo2V is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, JIS G4801 SUP9 vs IS 3195 52Cr4Mo2V is a 66.6% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
JIS G4801 SUP9
IS 3195 52Cr4Mo2V
Tensile Strength
1180 MPa min (oil hardened)
Not specified
Yield Strength
≥1030 MPa
Not specified
Elongation
≥7%
Not specified
Hardness
363–429 HB
Not specified
Hardness, annealed
Not specified
<=255 HB
Hardness, untreated (hot rolled)
Not specified
about 310 HB (for guidance only)
Typical Applications
JIS G4801 SUP9
Automotive leaf springs, suspension springs
IS 3195 52Cr4Mo2V
Volute and helical springs for railway rolling stock; flats and rounds, springs worked hot and heat-treated (clause 1.1, foreword)
Key Differences
IS 3195 52Cr4Mo2V specifies Mo, V which are not specified for JIS G4801 SUP9.
Can JIS G4801 SUP9 Be Substituted With IS 3195 52Cr4Mo2V?
JIS G4801 SUP9 and IS 3195 52Cr4Mo2V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between JIS G4801 SUP9 and IS 3195 52Cr4Mo2V?
IS 3195 52Cr4Mo2V specifies Mo, V which are not specified for JIS G4801 SUP9.
Can JIS G4801 SUP9 be substituted with IS 3195 52Cr4Mo2V?
JIS G4801 SUP9 and IS 3195 52Cr4Mo2V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.