Post Stock Login Register

JIS G4805 SUJ2 vs IS 1570 (Part 6) T55Cr3

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

JIS G4805 SUJ2 (JIS G 4805:1999) and IS 1570 (Part 6) T55Cr3 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. JIS G4805 SUJ2 is defined under Japanese Industrial Standards (JIS), originating from Japan, while IS 1570 (Part 6) T55Cr3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, JIS G4805 SUJ2 vs IS 1570 (Part 6) T55Cr3 is a 75.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With JIS G4805 SUJ2:
EN ISO 683-17 100Cr6 AISI 52100 GB/T 1299 4Cr5MoSiV1 GOST 5950 4H5MFS1 EN ISO 4957 1.2316 GB/T 1299 4Cr5MoSiV GOST 5950 3H2W8F DIN EN ISO 4957 1.2344 DIN EN ISO 4957 1.2379 GOST 5950 4H5MFS GB/T 1299 3Cr2W8V IS 1570 (Part 6) 103T3
Match Breakdown
CHEMISTRY MATCH
75.7%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property JIS G4805 SUJ2 IS 1570 (Part 6) T55Cr3
Standard JIS G 4805:1999 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.95–1.10 0.50-0.60
Si (%) 0.15–0.35 0.10-0.35
Mn (%) ≤0.50 0.60-0.80
Cr (%) 1.30–1.60 0.60-0.80
S (%) ≤0.025 <=0.035
P (%) ≤0.025 <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4805 SUJ2 IS 1570 (Part 6) T55Cr3
Tensile Strength ≥650 MPa (annealed) Not specified
Hardness HRC 60–64 (hardened) Not specified
Hardness HB 183–229 (annealed) Not specified
Typical Applications
JIS G4805 SUJ2
Ball bearings, roller bearings, bearing races, precision rolls
IS 1570 (Part 6) T55Cr3
Not documented
Can JIS G4805 SUJ2 Be Substituted With IS 1570 (Part 6) T55Cr3?
JIS G4805 SUJ2 and IS 1570 (Part 6) T55Cr3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4805 SUJ2
Round Bar → (6 listings)
Diameter: 60–80 mm (2.36–3.15 in)
Length: 5000–6900 mm (196.85–271.65 in)
IS 1570 (Part 6) T55Cr3
No active listings currently.
On M-EX Right Now
JIS G4805 SUJ2
6 active listings and RFQs →
IS 1570 (Part 6) T55Cr3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4805 SUJ2 and IS 1570 (Part 6) T55Cr3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4805 SUJ2 be substituted with IS 1570 (Part 6) T55Cr3?
JIS G4805 SUJ2 and IS 1570 (Part 6) T55Cr3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.