Post Stock Login Register

NF A35-551 XC10 vs ASTM A1008 SS Grade 80

Related Material — 57.4% match based on chemical composition and mechanical property overlap.

NF A35-551 XC10 (NF A35-551:1986) and ASTM A1008 SS Grade 80 (ASTM A1008) are both steel grades. Both fall under the Structural Steel category. NF A35-551 XC10 is typically used for fabricated parts, cold formed components, tubes, structural parts, bolts, nuts, welded assemblies, while ASTM A1008 SS Grade 80 is commonly used for cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts. NF A35-551 XC10 is defined under Association Francaise de Normalisation (NF), originating from France, while ASTM A1008 SS Grade 80 is defined under ASTM International, originating from United States.

As per chemical composition, NF A35-551 XC10 vs ASTM A1008 SS Grade 80 is a 86% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 57.4%.

Frequently Compared With NF A35-551 XC10:
CSA G40.21 400W CSA G40.21 350W CSA G40.21 260W GOST 19281 09G2S AS/NZS 3679.1 350 CSA G40.21 480W CSA G40.21 300W CSA G40.21 400A ASTM A1008 SS Grade 50 AS/NZS 3679.1 300 ASTM A283C ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
86%
MECHANICAL MATCH
0%
OVERALL
57.4%
Specifications
Property NF A35-551 XC10 ASTM A1008 SS Grade 80
Standard NF A35-551:1986 ASTM A1008
Category Structural Steel Structural Steel
C (%) 0.08-0.13 <=0.25
Si (%) <=0.35 <=0.50
Mn (%) 0.30-0.60 <=1.65
S (%) <=0.035 <=0.040
P (%) <=0.035 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property NF A35-551 XC10 ASTM A1008 SS Grade 80
Tensile Strength 320-420 MPa 570 MPa min
Yield Strength >=210 MPa 550 MPa min
Elongation >=28% 10% min
Hardness 110-140 HB Not specified
Typical Applications
NF A35-551 XC10
fabricated parts, cold formed components, tubes, structural parts, bolts, nuts, welded assemblies
ASTM A1008 SS Grade 80
Cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts
Can NF A35-551 XC10 Be Substituted With ASTM A1008 SS Grade 80?
NF A35-551 XC10 and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
NF A35-551 XC10
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2900 mm (98.43–114.17 in)
ASTM A1008 SS Grade 80
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3700 mm (98.43–145.67 in)
On M-EX Right Now
NF A35-551 XC10
2 active listings and RFQs →
ASTM A1008 SS Grade 80
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between NF A35-551 XC10 and ASTM A1008 SS Grade 80?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can NF A35-551 XC10 be substituted with ASTM A1008 SS Grade 80?
NF A35-551 XC10 and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.