Post Stock Login Register

NF A35-552 35CD4 vs IS 1570 (Part 4) 42Cr4Mo2

Strong Match — 85.6% match based on chemical composition and mechanical property overlap.

NF A35-552 35CD4 (NF A35-552:1986) and IS 1570 (Part 4) 42Cr4Mo2 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. NF A35-552 35CD4 is defined under Association Francaise de Normalisation (NF), originating from France, while IS 1570 (Part 4) 42Cr4Mo2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, NF A35-552 35CD4 vs IS 1570 (Part 4) 42Cr4Mo2 is a 85.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.6%.

Frequently Compared With NF A35-552 35CD4:
NF A35-565 100C6 GOST 4543 12HN3A UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 07Cr4Mo6
Match Breakdown
CHEMISTRY MATCH
85.6%
MECHANICAL MATCH
No shared data
OVERALL
85.6%
Specifications
Property NF A35-552 35CD4 IS 1570 (Part 4) 42Cr4Mo2
Standard NF A35-552:1986 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.32-0.39 0.38-0.45
Si (%) 0.15-0.40 0.10-0.35
Mn (%) 0.50-0.80 0.60-0.90
S (%) <=0.035 Not specified
P (%) <=0.035 Not specified
Cr (%) 0.90-1.20 0.90-1.20
Mo (%) 0.15-0.30 0.15-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property NF A35-552 35CD4 IS 1570 (Part 4) 42Cr4Mo2
Tensile Strength 850-1000 MPa Not specified
Yield Strength >=650 MPa Not specified
Elongation >=14% Not specified
Hardness 248-302 HB Not specified
Typical Applications
NF A35-552 35CD4
gears, shafts, axles, connecting rods, high strength bolts, automotive parts
IS 1570 (Part 4) 42Cr4Mo2
Not documented
Key Differences
Can NF A35-552 35CD4 Be Substituted With IS 1570 (Part 4) 42Cr4Mo2?
NF A35-552 35CD4 and IS 1570 (Part 4) 42Cr4Mo2 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 4) 42Cr4Mo2 is often considered as a substitute for NF A35-552 35CD4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
NF A35-552 35CD4
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5000–6200 mm (196.85–244.09 in)
IS 1570 (Part 4) 42Cr4Mo2
No active listings currently.
On M-EX Right Now
NF A35-552 35CD4
2 active listings and RFQs →
IS 1570 (Part 4) 42Cr4Mo2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between NF A35-552 35CD4 and IS 1570 (Part 4) 42Cr4Mo2?
NF A35-552 35CD4 specifies S, P which are not specified for IS 1570 (Part 4) 42Cr4Mo2.
Can NF A35-552 35CD4 be substituted with IS 1570 (Part 4) 42Cr4Mo2?
NF A35-552 35CD4 and IS 1570 (Part 4) 42Cr4Mo2 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 4) 42Cr4Mo2 is often considered as a substitute for NF A35-552 35CD4 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.