Post Stock Login Register

NF A35-552 XC60 vs SAE J403 1060

Strong Match — 89.1% match based on chemical composition and mechanical property overlap.

NF A35-552 XC60 (NF A35-552:1986) and SAE J403 1060 (SAE J403:2014) are both steel grades. Both fall under the Carbon Steel category. NF A35-552 XC60 is typically used for used for springs, knives, wear parts, punches, blades, and high-strength tools., while SAE J403 1060 is commonly used for chemistry-only grade; product scope as listed in the composition notes. NF A35-552 XC60 is defined under Association Francaise de Normalisation (NF), originating from France, while SAE J403 1060 is defined under SAE International, originating from United States.

As per chemical composition, NF A35-552 XC60 vs SAE J403 1060 is a 89.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.1%.

Frequently Compared With NF A35-552 XC60:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 045A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 060A62 BS 970 (Part 1) 040A04 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
89.1%
MECHANICAL MATCH
No shared data
OVERALL
89.1%
Specifications
Property NF A35-552 XC60 SAE J403 1060
Standard NF A35-552:1986 SAE J403:2014
Category Carbon Steel Carbon Steel
C (%) 0.57-0.65 0.55-0.65
Si (%) 0.10-0.35 Not specified
Mn (%) 0.50-0.80 0.60-0.90
P (%) 0.045 max <=0.030 (flat rolled), <=0.040 (long products)
S (%) 0.045 max <=0.035 (flat rolled), <=0.050 (long products)
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property NF A35-552 XC60 SAE J403 1060
Tensile Strength 800-950 MPa Not specified
Yield Strength 500-650 MPa Not specified
Elongation 10-16% Not specified
Hardness 220-285 HB Not specified
Typical Applications
NF A35-552 XC60
Used for springs, knives, wear parts, punches, blades, and high-strength tools.
SAE J403 1060
Chemistry-only grade; product scope as listed in the composition notes
Key Differences
Can NF A35-552 XC60 Be Substituted With SAE J403 1060?
NF A35-552 XC60 and SAE J403 1060 overlap closely enough on chemistry and mechanical properties that SAE J403 1060 is often considered as a substitute for NF A35-552 XC60 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
NF A35-552 XC60
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5500–5800 mm (216.54–228.35 in)
SAE J403 1060
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 4200–6200 mm (165.35–244.09 in)
On M-EX Right Now
NF A35-552 XC60
2 active listings and RFQs →
SAE J403 1060
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between NF A35-552 XC60 and SAE J403 1060?
NF A35-552 XC60 specifies Si which is not specified for SAE J403 1060.
Can NF A35-552 XC60 be substituted with SAE J403 1060?
NF A35-552 XC60 and SAE J403 1060 overlap closely enough on chemistry and mechanical properties that SAE J403 1060 is often considered as a substitute for NF A35-552 XC60 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.