Post Stock Login Register

SAE J403 1074 vs BS 970 (Part 1) 060A72

Strong Match — 92.7% match based on chemical composition and mechanical property overlap.

SAE J403 1074 (SAE J403:2001) and BS 970 (Part 1) 060A72 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Carbon Steel category. SAE J403 1074 is typically used for chemistry-only grade; product scope as listed in the composition notes, while BS 970 (Part 1) 060A72 is commonly used for as-rolled, or as-rolled and softened, steel (section two). SAE J403 1074 is defined under SAE International, originating from United States, while BS 970 (Part 1) 060A72 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, SAE J403 1074 vs BS 970 (Part 1) 060A72 is a 92.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 92.7%.

Frequently Compared With SAE J403 1074:
BS 970 (Part 1) 060A78 BS 970 (Part 3) 070M55 BS 970 (Part 1) 080A20 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045M10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045M10
Match Breakdown
CHEMISTRY MATCH
92.7%
MECHANICAL MATCH
No shared data
OVERALL
92.7%
Specifications
Property SAE J403 1074 BS 970 (Part 1) 060A72
Standard SAE J403:2001 BS 970 (Part 1):1991
Category Carbon Steel Carbon Steel
C (%) 0.70-0.80 0.70-0.75
Mn (%) 0.50-0.80 0.50-0.70
P (%) <=0.030 Not specified
S (%) <=0.050 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
SAE J403 1074
Chemistry-only grade; product scope as listed in the composition notes
BS 970 (Part 1) 060A72
As-rolled, or as-rolled and softened, steel (section two)
Key Differences
Can SAE J403 1074 Be Substituted With BS 970 (Part 1) 060A72?
SAE J403 1074 and BS 970 (Part 1) 060A72 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 060A72 is often considered as a substitute for SAE J403 1074 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
SAE J403 1074
0 active listings and RFQs →
BS 970 (Part 1) 060A72
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between SAE J403 1074 and BS 970 (Part 1) 060A72?
SAE J403 1074 specifies P, S which are not specified for BS 970 (Part 1) 060A72.
Can SAE J403 1074 be substituted with BS 970 (Part 1) 060A72?
SAE J403 1074 and BS 970 (Part 1) 060A72 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 060A72 is often considered as a substitute for SAE J403 1074 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.