Post Stock Login Register

UNI 6900 X5CrNi1810 vs EN 10088-1 X5CrNi18-10

Strong Match — 97.2% match based on chemical composition and mechanical property overlap.

UNI 6900 X5CrNi1810 (UNI 6900:1971) and EN 10088-1 X5CrNi18-10 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. UNI 6900 X5CrNi1810 is typically used for used in kitchen equipment, chemical tanks, piping, architectural panels, food processing equipment, and fasteners., while EN 10088-1 X5CrNi18-10 is commonly used for food, chemical, architectural applications. UNI 6900 X5CrNi1810 is defined under Ente Nazionale Italiano di Unificazione (UNI), originating from Italy, while EN 10088-1 X5CrNi18-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, UNI 6900 X5CrNi1810 vs EN 10088-1 X5CrNi18-10 is a 97.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 97.2%.

Frequently Compared With UNI 6900 X5CrNi1810:
GOST 5632 06Kh23N28 GB/T 3280 06Cr19Ni10 GOST 5632 12Kh13 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4845 EN 10088-1 1.4401 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
97.2%
MECHANICAL MATCH
No shared data
OVERALL
97.2%
Specifications
Property UNI 6900 X5CrNi1810 EN 10088-1 X5CrNi18-10
Standard UNI 6900:1971 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.07 max <=0.07
Si (%) 1.00 max <=1.00
Mn (%) 2.00 max <=2.00
P (%) 0.045 max <=0.045
S (%) 0.015 max <=0.015
Cr (%) 17.50-19.50 17.5-19.5
Ni (%) 8.00-10.50 8.0-10.5
N (%) Not specified <=0.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNI 6900 X5CrNi1810 EN 10088-1 X5CrNi18-10
Tensile Strength 520-720 MPa Not specified
Yield Strength 210 MPa min Not specified
Elongation 45% min Not specified
Hardness 187 HB max Not specified
Typical Applications
UNI 6900 X5CrNi1810
Used in kitchen equipment, chemical tanks, piping, architectural panels, food processing equipment, and fasteners.
EN 10088-1 X5CrNi18-10
Food, chemical, architectural applications
Key Differences
Can UNI 6900 X5CrNi1810 Be Substituted With EN 10088-1 X5CrNi18-10?
UNI 6900 X5CrNi1810 and EN 10088-1 X5CrNi18-10 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X5CrNi18-10 is often considered as a substitute for UNI 6900 X5CrNi1810 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
UNI 6900 X5CrNi1810
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2600–3700 mm (102.36–145.67 in)
EN 10088-1 X5CrNi18-10
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3900 mm (98.43–153.54 in)
On M-EX Right Now
UNI 6900 X5CrNi1810
2 active listings and RFQs →
EN 10088-1 X5CrNi18-10
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNI 6900 X5CrNi1810 and EN 10088-1 X5CrNi18-10?
EN 10088-1 X5CrNi18-10 specifies N which is not specified for UNI 6900 X5CrNi1810.
Can UNI 6900 X5CrNi1810 be substituted with EN 10088-1 X5CrNi18-10?
UNI 6900 X5CrNi1810 and EN 10088-1 X5CrNi18-10 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X5CrNi18-10 is often considered as a substitute for UNI 6900 X5CrNi1810 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.