Post Stock Login Register

UNS C52100 vs UNS C63000

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

UNS C52100 and UNS C63000 are both bronze grades. Both fall under the Bronze Alloys category. UNS C52100 is defined under Unified Numbering System (UNS), originating from United States, while UNS C63000 is defined under Unified Numbering System (UNS), originating from United States.

As per chemical composition, UNS C52100 vs UNS C63000 is a 35.7% match. As per mechanical properties, the match is 36.8%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With UNS C52100:
UNS C51000 UNS C93200 UNS C61300 UNS C65500 UNS C95400 UNS C90300
Match Breakdown
CHEMISTRY MATCH
35.7%
MECHANICAL MATCH
36.8%
OVERALL
35%
Specifications
Property UNS C52100 UNS C63000
Standard UNS UNS
Category Bronze Alloys Bronze Alloys
Cu (%) balance balance
Pb (%) 0-0.05 Not specified
Sn (%) 7.00-9.00 0-0.20
Zn (%) 0-0.20 0-0.30
Fe (%) 0-0.10 4.00-5.50
P (%) 0.03-0.35 Not specified
Ni (%) Not specified 2.00-4.00
Al (%) Not specified 9.00-11.00
Mn (%) Not specified 0-1.50
Si (%) Not specified 0-0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNS C52100 UNS C63000
Yield Strength ~500-585 MPa (H02 half-hard) ~345-520 MPa (M30/HR50)
Tensile Strength ~650-800 MPa (H02 half-hard) ~620-815 MPa (M30/HR50)
Elongation ~8-18% (H02 half-hard) ~15-20% (M30/HR50)
Note Phosphor bronze 8% Sn, values for H02 half-hard temper, common spring stock Aluminium bronze, values for as-extruded/hot-rolled condition
Key Differences
Can UNS C52100 Be Substituted With UNS C63000?
UNS C52100 and UNS C63000 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
UNS C52100
0 active listings and RFQs →
UNS C63000
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNS C52100 and UNS C63000?
UNS C52100 specifies Pb, P which are not specified for UNS C63000. UNS C63000 specifies Ni, Al, Mn, Si which are not specified for UNS C52100.
Can UNS C52100 be substituted with UNS C63000?
UNS C52100 and UNS C63000 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.