Post Stock Login Register

UNS C52100 vs UNS C95400

Minimal Match — 30.6% match based on chemical composition and mechanical property overlap.

UNS C52100 and UNS C95400 are both bronze grades. Both fall under the Bronze Alloys category. UNS C52100 is defined under Unified Numbering System (UNS), originating from United States, while UNS C95400 is defined under Unified Numbering System (UNS), originating from United States.

As per chemical composition, UNS C52100 vs UNS C95400 is a 27.5% match. As per mechanical properties, the match is 36.7%. Combined, this makes them a minimal match overall at 30.6%.

Frequently Compared With UNS C52100:
UNS C51000 UNS C93200 UNS C61300 UNS C63000 UNS C65500 UNS C90300
Match Breakdown
CHEMISTRY MATCH
27.5%
MECHANICAL MATCH
36.7%
OVERALL
30.6%
Specifications
Property UNS C52100 UNS C95400
Standard UNS UNS
Category Bronze Alloys Bronze Alloys
Cu (%) balance 83.00 min
Pb (%) 0-0.05 Not specified
Sn (%) 7.00-9.00 Not specified
Zn (%) 0-0.20 Not specified
Fe (%) 0-0.10 3.00-5.00
P (%) 0.03-0.35 Not specified
Ni (%) Not specified 0-1.50
Al (%) Not specified 10.00-11.50
Mn (%) Not specified 0-0.50
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNS C52100 UNS C95400
Yield Strength ~500-585 MPa (H02 half-hard) ~240-360 MPa (as cast)
Tensile Strength ~650-800 MPa (H02 half-hard) ~600-710 MPa (as cast)
Elongation ~8-18% (H02 half-hard) ~8-16% (as cast)
Note Phosphor bronze 8% Sn, values for H02 half-hard temper, common spring stock Aluminium bronze casting alloy, indicative as-cast values
Key Differences
Can UNS C52100 Be Substituted With UNS C95400?
UNS C52100 and UNS C95400 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
UNS C52100
No active listings currently.
UNS C95400
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 1000–1000 mm (39.37–39.37 in)
On M-EX Right Now
UNS C52100
0 active listings and RFQs →
UNS C95400
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNS C52100 and UNS C95400?
UNS C52100 specifies Pb, Sn, Zn, P which are not specified for UNS C95400. UNS C95400 specifies Ni, Al, Mn which are not specified for UNS C52100.
Can UNS C52100 be substituted with UNS C95400?
UNS C52100 and UNS C95400 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.