Post Stock Login Register

UNS C52100 vs UNS C65500

Minimal Match — 28.8% match based on chemical composition and mechanical property overlap.

UNS C52100 and UNS C65500 are both bronze grades. Both fall under the Bronze Alloys category. UNS C52100 is defined under Unified Numbering System (UNS), originating from United States, while UNS C65500 is defined under Unified Numbering System (UNS), originating from United States.

As per chemical composition, UNS C52100 vs UNS C65500 is a 43.2% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 28.8%.

Frequently Compared With UNS C52100:
UNS C51000 UNS C93200 UNS C61300 UNS C63000 UNS C95400 UNS C90300
Match Breakdown
CHEMISTRY MATCH
43.2%
MECHANICAL MATCH
0%
OVERALL
28.8%
Specifications
Property UNS C52100 UNS C65500
Standard UNS UNS
Category Bronze Alloys Bronze Alloys
Cu (%) balance balance
Pb (%) 0-0.05 0-0.05
Sn (%) 7.00-9.00 Not specified
Zn (%) 0-0.20 0-1.50
Fe (%) 0-0.10 0-0.80
P (%) 0.03-0.35 Not specified
Ni (%) Not specified 0-0.60
Mn (%) Not specified 0.50-1.30
Si (%) Not specified 2.80-3.80
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNS C52100 UNS C65500
Yield Strength ~500-585 MPa (H02 half-hard) ~145 MPa (O60 soft anneal)
Tensile Strength ~650-800 MPa (H02 half-hard) ~365 MPa (O60 soft anneal, mill spec min 360 MPa)
Elongation ~8-18% (H02 half-hard) ~50% (O60 soft anneal)
Note Phosphor bronze 8% Sn, values for H02 half-hard temper, common spring stock Silicon bronze, values for O60 soft annealed condition, cross-checked against mill datasheet minimums
Key Differences
Can UNS C52100 Be Substituted With UNS C65500?
UNS C52100 and UNS C65500 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
UNS C52100
0 active listings and RFQs →
UNS C65500
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNS C52100 and UNS C65500?
UNS C52100 specifies Sn, P which are not specified for UNS C65500. UNS C65500 specifies Ni, Mn, Si which are not specified for UNS C52100.
Can UNS C52100 be substituted with UNS C65500?
UNS C52100 and UNS C65500 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.