Post Stock Login Register

UNS C10100 vs UNS C10200

Related Material — 58.1% match based on chemical composition and mechanical property overlap.

UNS C10100 and UNS C10200 are both copper grades. Both fall under the Copper Alloys category. UNS C10100 is defined under Unified Numbering System (UNS), originating from United States, while UNS C10200 is defined under Unified Numbering System (UNS), originating from United States.

As per chemical composition, UNS C10100 vs UNS C10200 is a 37.1% match. As per mechanical properties, the match is 100%. Combined, this makes them a related material overall at 58.1%.

Frequently Compared With UNS C10100:
UNS C11000 UNS C12200 UNS C12000 UNS C14500 UNS C17200 UNS C19400
Match Breakdown
CHEMISTRY MATCH
37.1%
MECHANICAL MATCH
100%
OVERALL
58.1%
Specifications
Property UNS C10100 UNS C10200
Standard UNS UNS
Category Copper Alloys Copper Alloys
Cu (%) 99.99 min 99.95 min
Pb (%) 0-0.0005 Not specified
Zn (%) 0-0.0001 Not specified
Fe (%) 0-0.0010 Not specified
P (%) 0-0.0003 Not specified
Ag (%) 0-0.0025 Not specified
As (%) 0-0.0005 Not specified
O (%) 0-0.0005 0-0.0010
Sb (%) 0-0.0004 Not specified
Te (%) 0-0.0002 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNS C10100 UNS C10200
Yield Strength ~69 MPa (annealed O60) ~69 MPa (annealed O60)
Tensile Strength ~220 MPa (annealed O60) ~220 MPa (annealed O60)
Elongation ~45% (annealed O60) ~45% (annealed O60)
Note Oxygen-free electronic copper, values for soft annealed condition Oxygen-free copper, values for soft annealed condition
Key Differences
Can UNS C10100 Be Substituted With UNS C10200?
UNS C10100 and UNS C10200 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
UNS C10100
0 active listings and RFQs →
UNS C10200
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNS C10100 and UNS C10200?
UNS C10100 specifies Pb, Zn, Fe, P which are not specified for UNS C10200.
Can UNS C10100 be substituted with UNS C10200?
UNS C10100 and UNS C10200 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.