Post Stock Login Register

UNS C10200 vs UNS C12000

Strong Match — 88.9% match based on chemical composition and mechanical property overlap.

UNS C10200 and UNS C12000 are both copper grades. Both fall under the Copper Alloys category. UNS C10200 is defined under Unified Numbering System (UNS), originating from United States, while UNS C12000 is defined under Unified Numbering System (UNS), originating from United States.

As per chemical composition, UNS C10200 vs UNS C12000 is a 83.4% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 88.9%.

Frequently Compared With UNS C10200:
UNS C11000 UNS C12200 UNS C10100 UNS C14500 UNS C17200 UNS C19400
Match Breakdown
CHEMISTRY MATCH
83.4%
MECHANICAL MATCH
100%
OVERALL
88.9%
Specifications
Property UNS C10200 UNS C12000
Standard UNS UNS
Category Copper Alloys Copper Alloys
Cu (%) 99.95 min 99.90 min
O (%) 0-0.0010 Not specified
P (%) Not specified 0.004-0.012
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNS C10200 UNS C12000
Yield Strength ~69 MPa (annealed O60) ~69 MPa (annealed O60)
Tensile Strength ~220 MPa (annealed O60) ~220 MPa (annealed O60)
Elongation ~45% (annealed O60) ~45% (annealed O60)
Note Oxygen-free copper, values for soft annealed condition Phosphorized copper (low P), values for soft annealed condition
Key Differences
Can UNS C10200 Be Substituted With UNS C12000?
UNS C10200 and UNS C12000 overlap closely enough on chemistry and mechanical properties that UNS C12000 is often considered as a substitute for UNS C10200 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
UNS C10200
0 active listings and RFQs →
UNS C12000
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNS C10200 and UNS C12000?
UNS C10200 specifies O which is not specified for UNS C12000. UNS C12000 specifies P which is not specified for UNS C10200.
Can UNS C10200 be substituted with UNS C12000?
UNS C10200 and UNS C12000 overlap closely enough on chemistry and mechanical properties that UNS C12000 is often considered as a substitute for UNS C10200 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.