Post Stock Login Register

UNS C12000 vs UNS C10200

Strong Match — 88.9% match based on chemical composition and mechanical property overlap.

UNS C12000 and UNS C10200 are both copper grades. Both fall under the Copper Alloys category. UNS C12000 is defined under Unified Numbering System (UNS), originating from United States, while UNS C10200 is defined under Unified Numbering System (UNS), originating from United States.

As per chemical composition, UNS C12000 vs UNS C10200 is a 83.4% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 88.9%.

Frequently Compared With UNS C12000:
UNS C11000 UNS C12200 UNS C14500 UNS C10100 UNS C19400 UNS C17200
Match Breakdown
CHEMISTRY MATCH
83.4%
MECHANICAL MATCH
100%
OVERALL
88.9%
Specifications
Property UNS C12000 UNS C10200
Standard UNS UNS
Category Copper Alloys Copper Alloys
Cu (%) 99.90 min 99.95 min
P (%) 0.004-0.012 Not specified
O (%) Not specified 0-0.0010
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNS C12000 UNS C10200
Yield Strength ~69 MPa (annealed O60) ~69 MPa (annealed O60)
Tensile Strength ~220 MPa (annealed O60) ~220 MPa (annealed O60)
Elongation ~45% (annealed O60) ~45% (annealed O60)
Note Phosphorized copper (low P), values for soft annealed condition Oxygen-free copper, values for soft annealed condition
Key Differences
Can UNS C12000 Be Substituted With UNS C10200?
UNS C12000 and UNS C10200 overlap closely enough on chemistry and mechanical properties that UNS C10200 is often considered as a substitute for UNS C12000 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
UNS C12000
0 active listings and RFQs →
UNS C10200
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNS C12000 and UNS C10200?
UNS C12000 specifies P which is not specified for UNS C10200. UNS C10200 specifies O which is not specified for UNS C12000.
Can UNS C12000 be substituted with UNS C10200?
UNS C12000 and UNS C10200 overlap closely enough on chemistry and mechanical properties that UNS C10200 is often considered as a substitute for UNS C12000 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.