Strong Match — 94.7% match
based on chemical composition and mechanical property overlap.
UNS C12000 and UNS C12200 are both copper grades.
Both fall under the Copper Alloys category.
UNS C12000 is defined under Unified Numbering System (UNS), originating from United States, while UNS C12200 is defined under Unified Numbering System (UNS), originating from United States.
As per chemical composition, UNS C12000 vs UNS C12200 is a 92% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 94.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
UNS C12000
UNS C12200
Yield Strength
~69 MPa (annealed O60)
~69 MPa (annealed O60)
Tensile Strength
~220 MPa (annealed O60)
~220 MPa (annealed O60)
Elongation
~45% (annealed O60)
~45% (annealed O60)
Note
Phosphorized copper (low P), values for soft annealed condition
Phosphorized copper (high P), values for soft annealed condition
Can UNS C12000 Be Substituted With UNS C12200?
UNS C12000 and UNS C12200 overlap closely enough on chemistry and mechanical properties that UNS C12200 is often considered as a substitute for UNS C12000 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between UNS C12000 and UNS C12200?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can UNS C12000 be substituted with UNS C12200?
UNS C12000 and UNS C12200 overlap closely enough on chemistry and mechanical properties that UNS C12200 is often considered as a substitute for UNS C12000 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.