EN 10083-3 34CrNiMo6 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10083-3 34CrNiMo6, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 12:00 AM
Live Signal: This grade’s supply and demand by form, from listings and RFQs open right now. Use this to act today. For example, “Is there a buyer gap in this grade’s round bar this week?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Round Bar |
3 |
0 |
Deep Supply |
96,898
to
97,955
median 97,611
|
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10083-3 34CrNiMo6 is an Alloy Steel grade: A nickel chromium molybdenum alloy steel for quenching and tempering to EN 10083-3:2006 (steel number 1.6582). Supplied as semi-finished products, bars, rod, wide flats, hot rolled strip, sheet and plate, and forgings. Quenched and tempered tensile strength 1200 to 1400 MPa for ruling sections up to 16 mm.
Typical applications: Heavy duty shafts, crankshafts, gears, high tensile components.
Equivalent / Similar Grades (9)
Chemical Composition (%)
| C |
Cr |
Mn |
Mo |
Ni |
P |
S |
Si |
| 0.30-0.38 |
1.30-1.70 |
0.50-0.80 |
0.15-0.30 |
1.30-1.70 |
<=0.025 |
<=0.035 |
<=0.40 |
Mechanical Properties
| Condition |
Quenched and tempered (+QT), ruling section d <= 16 mm |
| Elongation |
9% min |
| Hardness |
Soft annealed (+A): 248 HBW max |
| Tensile Strength |
1200 to 1400 MPa |
| Yield Strength |
1000 MPa min |