EN 10083-3 34CrNiMo6 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10083-3 34CrNiMo6, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 1:00 AM
Lifetime: This grade’s supply and demand by form, across everything ever listed on M-EX. Use this for the long view. For example, “Has this grade historically drawn more buyers than sellers?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Round Bar |
58 |
1 |
Deep Supply |
73,365
to
101,000
median 98,000
|
EN 10083-3 34CrNiMo6's demand ranks in the top 38% of all 484 tracked grades platform-wide.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10083-3 34CrNiMo6 is an Alloy Steel grade: A nickel chromium molybdenum alloy steel for quenching and tempering to EN 10083-3:2006 (steel number 1.6582). Supplied as semi-finished products, bars, rod, wide flats, hot rolled strip, sheet and plate, and forgings. Quenched and tempered tensile strength 1200 to 1400 MPa for ruling sections up to 16 mm.
Typical applications: Heavy duty shafts, crankshafts, gears, high tensile components.
Equivalent / Similar Grades (9)
Chemical Composition (%)
| C |
Cr |
Mn |
Mo |
Ni |
P |
S |
Si |
| 0.30-0.38 |
1.30-1.70 |
0.50-0.80 |
0.15-0.30 |
1.30-1.70 |
<=0.025 |
<=0.035 |
<=0.40 |
Mechanical Properties
| Condition |
Quenched and tempered (+QT), ruling section d <= 16 mm |
| Elongation |
9% min |
| Hardness |
Soft annealed (+A): 248 HBW max |
| Tensile Strength |
1200 to 1400 MPa |
| Yield Strength |
1000 MPa min |