Market Intelligence  ›  Supply and Demand Balance  ›  IS 2062 E250A

IS 2062 E250A Steel: Supply & Demand

Buyer RFQ demand against seller listing supply for IS 2062 E250A, broken down by form. Signals are indicative and derived from listings and RFQs.

Last updated: 16 Oct 2026, 1:00 AM

Live Signal Lifetime
Lifetime: This grade’s supply and demand by form, across everything ever listed on M-EX. Use this for the long view. For example, “Has this grade historically drawn more buyers than sellers?”
Shortage
0
In Demand
0
Healthy
1
Oversupplied
1
Deep Supply
1
Low Activity
0
Form Supply Demand Status Price Band (Rs./MT)
Plate 89 51 Oversupplied 58,000 to 67,000
median 62,000
Angle 69 67 Healthy 58,000 to 69,000
median 61,565
Flat Bar 53 0 Deep Supply 61,000 to 64,606
median 62,697
IS 2062 E250A's demand ranks in the top 3% of all 484 tracked grades platform-wide.

Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.

IS 2062 E250A is a Structural Steel grade: E250A is grade E 250, quality A, in IS 2062:2011 (Hot Rolled Medium and High Tensile Structural Steel), which covers plates, strips, shapes, sections, flats and bars for structural work. The grade is named by its minimum yield stress. Typical applications: structural fabrication, bridges, industrial sheds, machinery frames, general engineering components, plates, welded structures.
Equivalent / Similar Grades (9)
Grade Standard Region
S250GD EN Europe
ASTM A36 ASTM USA
SS400 JIS Japan
Q235 GB China
A36 ASTM USA
S235JR EN 10025 Europe
JIS G3101 SS400 JIS G3101 Japan
CSA G40.21 260W CSA G40.21 Canada
AS/NZS 1594 HA250 AS/NZS 1594 Australia
Chemical Composition (%)
C Mn Si S P CEV
<=0.23 <=1.50 <=0.40 <=0.045 <=0.045 <=0.42
Mechanical Properties
Tensile Strength >=410 MPa
Yield Strength 250 MPa (<=20mm) / 240 MPa (20-40mm) / 230 MPa (>40mm)
Elongation >=23%
Impact not required