Post Stock Login Register
Market Intelligence  ›  Supply and Demand Balance  ›  IS 2062 E350A

IS 2062 E350A Steel: Supply & Demand

Buyer RFQ demand against seller listing supply for IS 2062 E350A, broken down by form. Signals are indicative and derived from listings and RFQs.

Last updated: 16 Oct 2026, 2:00 PM

Live Signal Lifetime
Live Signal: This grade’s supply and demand by form, from listings and RFQs open right now. Use this to act today. For example, “Is there a buyer gap in this grade’s round bar this week?”
Shortage
0
In Demand
1
Healthy
1
Oversupplied
0
Deep Supply
0
Low Activity
0
Form Supply Demand Status Price Band (Rs./MT)
Plate 3 4 In Demand 47,712 to 70,959
median 64,235
Angle 3 3 Healthy 61,184 to 63,431
median 62,132
IS 2062 E350A's demand ranks in the top 3% of all 484 tracked grades platform-wide.
The Plate form most recently moved into In Demand, 39 days ago.

Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.

IS 2062 E350A is a Structural Steel grade: E350A is grade E 350, quality A, in IS 2062:2011 (Hot Rolled Medium and High Tensile Structural Steel), which covers plates, strips, shapes, sections, flats and bars for structural work. The grade is named by its minimum yield stress. Typical applications: Heavy structural work, machinery bases, bridges.
Equivalent / Similar Grades (7)
Grade Standard Region
S355JR EN Europe
ASTM A572 Gr50 ASTM USA
SM490A JIS Japan
CSA G40.21 400W CSA G40.21 Canada
AS/NZS 3678 Grade 400 AS/NZS 3678 Australia
AS/NZS 1594 HA350 AS/NZS 1594 Australia
AS/NZS 3678 Grade 350L0 AS/NZS 3678 Australia
Chemical Composition (%)
C Mn Si S P CEV
<=0.20 <=1.55 <=0.45 <=0.045 <=0.045 <=0.47
Mechanical Properties
Tensile Strength >=490 MPa
Yield Strength 350 MPa (<=20mm) / 330 MPa (20-40mm) / 320 MPa (>40mm)
Elongation >=22%
Impact not required