Market Intelligence › Supply and Demand Balance › IS 2062 E350A

IS 2062 E350A Steel: Supply & Demand

Buyer RFQ demand against seller listing supply for IS 2062 E350A, broken down by form. Signals are indicative and derived from listings and RFQs.

Last updated: 16 Oct 2026, 1:00 AM

Live Signal Lifetime

Lifetime: This grade’s supply and demand by form, across everything ever listed on M-EX. Use this for the long view. For example, “Has this grade historically drawn more buyers than sellers?”

Shortage

In Demand

Healthy

Oversupplied

Deep Supply

Low Activity

Form	Supply	Demand	Status	Price Band (Rs./MT)
Plate	59	66	In Demand	46,967 to 71,663 median 64,681
Angle	73	50	Oversupplied	60,000 to 71,000 median 62,505

IS 2062 E350A's demand ranks in the top 4% of all 484 tracked grades platform-wide.

The Plate form most recently moved into In Demand, 40 days ago.

Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.

IS 2062 E350A is a Structural Steel grade: E350A is grade E 350, quality A, in IS 2062:2011 (Hot Rolled Medium and High Tensile Structural Steel), which covers plates, strips, shapes, sections, flats and bars for structural work. The grade is named by its minimum yield stress. Typical applications: Heavy structural work, machinery bases, bridges.

Equivalent / Similar Grades (7)

Grade	Standard	Region
S355JR	EN	Europe
ASTM A572 Gr50	ASTM	USA
SM490A	JIS	Japan
CSA G40.21 400W	CSA G40.21	Canada
AS/NZS 3678 Grade 400	AS/NZS 3678	Australia
AS/NZS 1594 HA350	AS/NZS 1594	Australia
AS/NZS 3678 Grade 350L0	AS/NZS 3678	Australia

Chemical Composition (%)

C	Mn	Si	S	P	CEV
<=0.20	<=1.55	<=0.45	<=0.045	<=0.045	<=0.47

Mechanical Properties

Tensile Strength	>=490 MPa
Yield Strength	350 MPa (<=20mm) / 330 MPa (20-40mm) / 320 MPa (>40mm)
Elongation	>=22%
Impact	not required