IS 6911 X04Cr19Ni9 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for IS 6911 X04Cr19Ni9, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 4:00 AM
Live Signal: This grade’s supply and demand by form, from listings and RFQs open right now. Use this to act today. For example, “Is there a buyer gap in this grade’s round bar this week?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Sheet |
2 |
0 |
Low Activity |
Insufficient data
|
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
IS 6911 X04Cr19Ni9 is a Stainless Steel grade: Austenitic stainless steel X04Cr19Ni9 (numerical symbol 304 S1) to IS 6911:1992 (reaffirmed 1998), made as plate, sheet and strip and normally supplied solution annealed and descaled. Minimum tensile strength annealed is 400 MPa with 0.2% proof stress of 200 MPa.
Typical applications: Used in food equipment, chemical processing units, kitchenware, tanks, piping, and architectural applications..
Equivalent / Similar Grades (5)
Chemical Composition (%)
| C |
Cr |
Mn |
Ni |
P |
S |
Si |
| <=0.08 |
17.5-20.0 |
<=2.0 |
8.0-10.0 |
<=0.045 |
<=0.030 |
<=1.0 |
Mechanical Properties
| Bend Test (180 deg) |
Not required |
| Elongation (50 mm, annealed) |
>=40% |
| Hardness (annealed, max) |
192 HBS, 92 HRB |
| Tensile Strength (annealed) |
>=400 MPa |
| Yield Strength (0.2% proof, annealed) |
>=200 MPa |