Strong Match — 99.1% match
based on chemical composition and mechanical property overlap.
AISI 52100 and EN ISO 683-17 100Cr6 (EN ISO 683-17:2014) are both steel grades.
Both fall under the Tool & Die Steels category.
AISI 52100 is typically used for anti-friction bearings, ball screws, precision rollers, while EN ISO 683-17 100Cr6 is commonly used for rolling element bearings, precision components, cold work tooling.
AISI 52100 is defined under AISI, originating from United States, while EN ISO 683-17 100Cr6 is defined under European Standard (EN), originating from Europe.
As per chemical composition, AISI 52100 vs EN ISO 683-17 100Cr6 is a 98.6% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 99.1%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Rolling element bearings, precision components, cold work tooling
Can AISI 52100 Be Substituted With EN ISO 683-17 100Cr6?
AISI 52100 and EN ISO 683-17 100Cr6 overlap closely enough on chemistry and mechanical properties that EN ISO 683-17 100Cr6 is often considered as a substitute for AISI 52100 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between AISI 52100 and EN ISO 683-17 100Cr6?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AISI 52100 be substituted with EN ISO 683-17 100Cr6?
AISI 52100 and EN ISO 683-17 100Cr6 overlap closely enough on chemistry and mechanical properties that EN ISO 683-17 100Cr6 is often considered as a substitute for AISI 52100 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.