Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
AISI 52100 and GB/T 1299 3Cr2W8V (GB/T 1299-2014) are both steel grades.
Both fall under the Tool & Die Steels category.
AISI 52100 is typically used for anti-friction bearings, ball screws, precision rollers, while GB/T 1299 3Cr2W8V is commonly used for used for hot forging dies, extrusion dies, die-casting molds, hot punches, and hot shear blades..
AISI 52100 is defined under AISI, originating from United States, while GB/T 1299 3Cr2W8V is defined under Guobiao Standards (GB/T), originating from China.
As per chemical composition, AISI 52100 vs GB/T 1299 3Cr2W8V is a 64.1% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Used for hot forging dies, extrusion dies, die-casting molds, hot punches, and hot shear blades.
Key Differences
GB/T 1299 3Cr2W8V specifies W, V which are not specified for AISI 52100.
Can AISI 52100 Be Substituted With GB/T 1299 3Cr2W8V?
AISI 52100 and GB/T 1299 3Cr2W8V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between AISI 52100 and GB/T 1299 3Cr2W8V?
GB/T 1299 3Cr2W8V specifies W, V which are not specified for AISI 52100.
Can AISI 52100 be substituted with GB/T 1299 3Cr2W8V?
AISI 52100 and GB/T 1299 3Cr2W8V share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.