Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
AISI 52100 and IS 3748 118T3 (IS 3748:1990) are both steel grades.
Both fall under the Tool & Die Steels category.
AISI 52100 is typically used for anti-friction bearings, ball screws, precision rollers, while IS 3748 118T3 is commonly used for cold work tools and dies for blanking, trimming, chipping and shearing.
AISI 52100 is defined under AISI, originating from United States, while IS 3748 118T3 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, AISI 52100 vs IS 3748 118T3 is a 76.4% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Cold work tools and dies for blanking, trimming, chipping and shearing
Key Differences
AISI 52100 specifies Cr which is not specified for IS 3748 118T3.
Can AISI 52100 Be Substituted With IS 3748 118T3?
AISI 52100 and IS 3748 118T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between AISI 52100 and IS 3748 118T3?
AISI 52100 specifies Cr which is not specified for IS 3748 118T3.
Can AISI 52100 be substituted with IS 3748 118T3?
AISI 52100 and IS 3748 118T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.