Post Stock Login Register

AISI 8615 vs IS 4367 07Cr4Mo6

Minimal Match — 37.6% match based on chemical composition and mechanical property overlap.

AISI 8615 and IS 4367 07Cr4Mo6 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. AISI 8615 is defined under AISI, originating from United States, while IS 4367 07Cr4Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, AISI 8615 vs IS 4367 07Cr4Mo6 is a 56.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 37.6%.

Frequently Compared With AISI 8615:
NF A35-565 100C6 GOST 4543 12HN3A UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 4367 10Cr9Mo10 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
56.5%
MECHANICAL MATCH
0%
OVERALL
37.6%
Specifications
Property AISI 8615 IS 4367 07Cr4Mo6
Standard AISI IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.13-0.18 <=0.12
Mn (%) 0.70-0.90 0.40-0.70
Si (%) 0.15-0.35 0.15-0.60
Ni (%) 0.40-0.70 <=0.30
Cr (%) 0.40-0.60 0.70-1.10
Mo (%) 0.15-0.25 0.45-0.65
P (%) 0.035 max <=0.035
S (%) 0.040 max <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AISI 8615 IS 4367 07Cr4Mo6
Tensile Strength 700-900 MPa 380-550 MPa
Yield Strength 500-700 MPa 225 MPa min
Elongation 14-20% >=19%
Hardness 180-240 HB Not specified
Izod Impact Not specified 60 J min
Hardness (soft annealed) Not specified <=170 HB
Condition Not specified Normalised and tempered, ruling section up to 40 mm
Typical Applications
AISI 8615
Used for gears, shafts, pinions, bushings, transmission parts, and carburized machinery components.
IS 4367 07Cr4Mo6
Not documented
Can AISI 8615 Be Substituted With IS 4367 07Cr4Mo6?
AISI 8615 and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AISI 8615
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4900–6300 mm (192.91–248.03 in)
IS 4367 07Cr4Mo6
No active listings currently.
On M-EX Right Now
AISI 8615
2 active listings and RFQs →
IS 4367 07Cr4Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between AISI 8615 and IS 4367 07Cr4Mo6?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AISI 8615 be substituted with IS 4367 07Cr4Mo6?
AISI 8615 and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.