Strong Match — 99.6% match
based on chemical composition and mechanical property overlap.
AISI 8617 and SAE J404 8617 (SAE J404:2000) are both steel grades.
Both fall under the Alloy Steel category.
AISI 8617 is typically used for used for gears, camshafts, transmission parts, pinions, bearings, and heavy-duty mechanical components., while SAE J404 8617 is commonly used for chemistry-only alloy steel grade; see the composition notes for product scope.
AISI 8617 is defined under AISI, originating from United States, while SAE J404 8617 is defined under SAE International, originating from United States.
As per chemical composition, AISI 8617 vs SAE J404 8617 is a 99.6% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 99.6%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
AISI 8617
SAE J404 8617
Tensile Strength
720-920 MPa
Not specified
Yield Strength
520-720 MPa
Not specified
Elongation
12-18%
Not specified
Hardness
190-250 HB
Not specified
Typical Applications
AISI 8617
Used for gears, camshafts, transmission parts, pinions, bearings, and heavy-duty mechanical components.
SAE J404 8617
Chemistry-only alloy steel grade; see the composition notes for product scope
Can AISI 8617 Be Substituted With SAE J404 8617?
AISI 8617 and SAE J404 8617 overlap closely enough on chemistry and mechanical properties that SAE J404 8617 is often considered as a substitute for AISI 8617 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between AISI 8617 and SAE J404 8617?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AISI 8617 be substituted with SAE J404 8617?
AISI 8617 and SAE J404 8617 overlap closely enough on chemistry and mechanical properties that SAE J404 8617 is often considered as a substitute for AISI 8617 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.