Post Stock Login Register

ASTM A959 SS410 vs ASTM A959 410Cb

Strong Match — 96.5% match based on chemical composition and mechanical property overlap.

ASTM A959 SS410 (ASTM A959:2011) and ASTM A959 410Cb (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 SS410 is typically used for cutlery, turbine blades, surgical instruments, fasteners, while ASTM A959 410Cb is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 SS410 is defined under ASTM International, originating from United States, while ASTM A959 410Cb is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 SS410 vs ASTM A959 410Cb is a 96.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 96.5%.

Frequently Compared With ASTM A959 SS410:
EN 10088-1 1.4006 GOST 5632 12Kh13 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4845 GOST 5632 08X18H10 ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
96.5%
MECHANICAL MATCH
No shared data
OVERALL
96.5%
Specifications
Property ASTM A959 SS410 ASTM A959 410Cb
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.18
Cr (%) 11.5-13.5 11.5-13.0
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Cb (%) Not specified 0.05-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 SS410
Cutlery, turbine blades, surgical instruments, fasteners
ASTM A959 410Cb
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 SS410 Be Substituted With ASTM A959 410Cb?
ASTM A959 SS410 and ASTM A959 410Cb overlap closely enough on chemistry and mechanical properties that ASTM A959 410Cb is often considered as a substitute for ASTM A959 SS410 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
ASTM A959 SS410
Round Bar → (3 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 2800–3300 mm (110.24–129.92 in)
ASTM A959 410Cb
No active listings currently.
On M-EX Right Now
ASTM A959 SS410
3 active listings and RFQs →
ASTM A959 410Cb
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 SS410 and ASTM A959 410Cb?
ASTM A959 410Cb specifies Cb which is not specified for ASTM A959 SS410.
Can ASTM A959 SS410 be substituted with ASTM A959 410Cb?
ASTM A959 SS410 and ASTM A959 410Cb overlap closely enough on chemistry and mechanical properties that ASTM A959 410Cb is often considered as a substitute for ASTM A959 SS410 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.