Strong Match — 93.3% match
based on chemical composition and mechanical property overlap.
ASTM A959 SS410 (ASTM A959:2011) and IS 6911 X04Cr12 (IS 6911:1992) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A959 SS410 is typically used for cutlery, turbine blades, surgical instruments, fasteners, while IS 6911 X04Cr12 is commonly used for stainless and heat-resisting steel plate, sheet and strip (clause 1.1).
ASTM A959 SS410 is defined under ASTM International, originating from United States, while IS 6911 X04Cr12 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, ASTM A959 SS410 vs IS 6911 X04Cr12 is a 93.3% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 93.3%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Stainless and heat-resisting steel plate, sheet and strip (clause 1.1)
Key Differences
IS 6911 X04Cr12 specifies Al which is not specified for ASTM A959 SS410.
Can ASTM A959 SS410 Be Substituted With IS 6911 X04Cr12?
ASTM A959 SS410 and IS 6911 X04Cr12 overlap closely enough on chemistry and mechanical properties that IS 6911 X04Cr12 is often considered as a substitute for ASTM A959 SS410 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between ASTM A959 SS410 and IS 6911 X04Cr12?
IS 6911 X04Cr12 specifies Al which is not specified for ASTM A959 SS410.
Can ASTM A959 SS410 be substituted with IS 6911 X04Cr12?
ASTM A959 SS410 and IS 6911 X04Cr12 overlap closely enough on chemistry and mechanical properties that IS 6911 X04Cr12 is often considered as a substitute for ASTM A959 SS410 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.