Strong Match — 98.5% match
based on chemical composition and mechanical property overlap.
AS/NZS 3678 Grade 350L0 (AS/NZS 3678:2016) and EN 10346 S350GD (EN 10346:2015) are both steel grades.
Both fall under the Structural Steel category.
AS/NZS 3678 Grade 350L0 is typically used for refrigerated storage structures, cold climate construction, lng facility structural steel, antarctic research stations., while EN 10346 S350GD is commonly used for continuous hot-dip galvanized structural steel strip/sheet; roll-formed and cold-formed structural sections, purlins, roofing and cladding requiring corrosion protection.
AS/NZS 3678 Grade 350L0 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while EN 10346 S350GD is defined under European Standard (EN), originating from Europe.
As per chemical composition, AS/NZS 3678 Grade 350L0 vs EN 10346 S350GD is a 97.7% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 98.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Continuous hot-dip galvanized structural steel strip/sheet; roll-formed and cold-formed structural sections, purlins, roofing and cladding requiring corrosion protection
Can AS/NZS 3678 Grade 350L0 Be Substituted With EN 10346 S350GD?
AS/NZS 3678 Grade 350L0 and EN 10346 S350GD overlap closely enough on chemistry and mechanical properties that EN 10346 S350GD is often considered as a substitute for AS/NZS 3678 Grade 350L0 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between AS/NZS 3678 Grade 350L0 and EN 10346 S350GD?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AS/NZS 3678 Grade 350L0 be substituted with EN 10346 S350GD?
AS/NZS 3678 Grade 350L0 and EN 10346 S350GD overlap closely enough on chemistry and mechanical properties that EN 10346 S350GD is often considered as a substitute for AS/NZS 3678 Grade 350L0 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.