Post Stock Login Register

ASTM A240/A240M S46800 vs ASTM A959 .-

Strong Match — 94.4% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S46800 (ASTM A240/A240M:2025) and ASTM A959 .- (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S46800 is typically used for pressure vessels and general applications (plate, sheet and strip), while ASTM A959 .- is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A240/A240M S46800 is defined under ASTM International, originating from United States, while ASTM A959 .- is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A240/A240M S46800 vs ASTM A959 .- is a 94.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 94.4%.

Frequently Compared With ASTM A240/A240M S46800:
GOST 5632 06Kh23N28 EN 10088-1 1.4006 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
94.4%
MECHANICAL MATCH
No shared data
OVERALL
94.4%
Specifications
Property ASTM A240/A240M S46800 ASTM A959 .-
Standard ASTM A240/A240M:2025 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Cr (%) 18.0-20.0 18.0-20.0
Ni (%) <=0.50 <=0.50
N (%) <=0.030 <=0.030
Ti (%) 0.07-0.30 0.07-0.30
Nb (%) 0.10-0.60 Not specified
Cb (%) Not specified 0.10-0.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S46800 ASTM A959 .-
Tensile Strength >=415 MPa Not specified
Yield Strength >=205 MPa Not specified
Elongation >=22% Not specified
Hardness <=90 HRBW Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S46800
Pressure vessels and general applications (plate, sheet and strip)
ASTM A959 .-
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A240/A240M S46800 Be Substituted With ASTM A959 .-?
ASTM A240/A240M S46800 and ASTM A959 .- overlap closely enough on chemistry and mechanical properties that ASTM A959 .- is often considered as a substitute for ASTM A240/A240M S46800 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A240/A240M S46800
0 active listings and RFQs →
ASTM A959 .-
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S46800 and ASTM A959 .-?
ASTM A240/A240M S46800 specifies Nb which is not specified for ASTM A959 .-. ASTM A959 .- specifies Cb which is not specified for ASTM A240/A240M S46800.
Can ASTM A240/A240M S46800 be substituted with ASTM A959 .-?
ASTM A240/A240M S46800 and ASTM A959 .- overlap closely enough on chemistry and mechanical properties that ASTM A959 .- is often considered as a substitute for ASTM A240/A240M S46800 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.