Post Stock Login Register

ASTM A283C vs CSA G40.21 350W

Related Material — 68.7% match based on chemical composition and mechanical property overlap.

ASTM A283C (ASTM A283) and CSA G40.21 350W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. ASTM A283C is typically used for used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures., while CSA G40.21 350W is commonly used for used in buildings, bridges, cranes, transmission towers, heavy equipment, and structural fabrications.. ASTM A283C is defined under ASTM International, originating from United States, while CSA G40.21 350W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, ASTM A283C vs CSA G40.21 350W is a 92.4% match. As per mechanical properties, the match is 21.4%. Combined, this makes them a related material overall at 68.7%.

Frequently Compared With ASTM A283C:
ASTM A1008 SS Grade 50 CSA G40.21 260W ASTM A1008 SS Grade 80 ASTM A572 Grade 50 ASTM A572 Gr.65 CSA G40.21 480W CSA G40.21 400W CSA G40.21 300W AS/NZS 3679.1 350 AS/NZS 3679.1 300 CSA G40.21 400A GOST 19281 09G2S
Match Breakdown
CHEMISTRY MATCH
92.4%
MECHANICAL MATCH
21.4%
OVERALL
68.7%
Specifications
Property ASTM A283C CSA G40.21 350W
Standard ASTM A283 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) 0.24 max 0.23 max
Mn (%) 0.90 max 0.50-1.50
P (%) 0.035 max 0.040 max
S (%) 0.040 max 0.050 max
Si (%) 0.40 max 0.15-0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A283C CSA G40.21 350W
Tensile Strength 380-515 MPa 450-620 MPa
Yield Strength 205 MPa min 350 MPa min
Elongation 23-27% 20% min
Hardness 120-170 HB 135-180 HB
Typical Applications
ASTM A283C
Used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures.
CSA G40.21 350W
Used in buildings, bridges, cranes, transmission towers, heavy equipment, and structural fabrications.
Can ASTM A283C Be Substituted With CSA G40.21 350W?
ASTM A283C and CSA G40.21 350W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A283C
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3700 mm (114.17–145.67 in)
CSA G40.21 350W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–3400 mm (106.3–133.86 in)
On M-EX Right Now
ASTM A283C
2 active listings and RFQs →
CSA G40.21 350W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A283C and CSA G40.21 350W?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A283C be substituted with CSA G40.21 350W?
ASTM A283C and CSA G40.21 350W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.