Post Stock Login Register

ASTM A514 vs EN 10028-2 10CrMo9-10

Minimal Match — 34.1% match based on chemical composition and mechanical property overlap.

ASTM A514 (ASTM A514) and EN 10028-2 10CrMo9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. ASTM A514 is typically used for used for cranes, mining equipment, pressure vessels, bridges, heavy trucks, and structural fabrication., while EN 10028-2 10CrMo9-10 is commonly used for flat products for pressure purposes. ASTM A514 is defined under ASTM International, originating from United States, while EN 10028-2 10CrMo9-10 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A514 vs EN 10028-2 10CrMo9-10 is a 51.1% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 34.1%.

Frequently Compared With ASTM A514:
GOST 4543 12HN3A NF A35-565 100C6 UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 1570 (Part 4) 103Cr6
Match Breakdown
CHEMISTRY MATCH
51.1%
MECHANICAL MATCH
0%
OVERALL
34.1%
Specifications
Property ASTM A514 EN 10028-2 10CrMo9-10
Standard ASTM A514 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.12-0.21 0.08-0.14
Mn (%) 0.70-1.60 0.40-0.80
Si (%) 0.15-0.40 <=0.50
Cr (%) 0.40-1.50 2.00-2.50
Mo (%) 0.15-0.60 0.90-1.10
Ni (%) 0.40-1.00 Not specified
P (%) 0.035 max <=0.020
S (%) 0.035 max <=0.010
N (%) Not specified <=0.012
Cu (%) Not specified <=0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A514 EN 10028-2 10CrMo9-10
Tensile Strength 760-895 MPa 480-630 MPa
Yield Strength 690 MPa min >=310 MPa
Elongation 16-18% >=18%
Hardness 235-293 HB Not specified
Condition Not specified Usual delivery condition normalized and tempered (+NT), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
ASTM A514
Used for cranes, mining equipment, pressure vessels, bridges, heavy trucks, and structural fabrication.
EN 10028-2 10CrMo9-10
Flat products for pressure purposes
Key Differences
Can ASTM A514 Be Substituted With EN 10028-2 10CrMo9-10?
ASTM A514 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A514
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5800–6500 mm (228.35–255.91 in)
EN 10028-2 10CrMo9-10
No active listings currently.
On M-EX Right Now
ASTM A514
2 active listings and RFQs →
EN 10028-2 10CrMo9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A514 and EN 10028-2 10CrMo9-10?
ASTM A514 specifies Ni which is not specified for EN 10028-2 10CrMo9-10. EN 10028-2 10CrMo9-10 specifies N, Cu which are not specified for ASTM A514.
Can ASTM A514 be substituted with EN 10028-2 10CrMo9-10?
ASTM A514 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.